Dell PowerVault ML6000 Reference Manual page 91

Table 128 Required Instances for ElementCapabilities
Property
Capabilities
ManagedElement
Table 129 Lun Mapping Instances of SCSIProtocolController
When LUN mapping is enabled, there is a an instance for each host-blade-port combination. A single host
has a single StorageHardwareID, which is then associated through AuthorizedSubject to multiple
AuthorizedPrivileges, one for each blade that the host is attached to (or has ever been), and that, in turn, is
associated through AuthorizedTarget to two SCSIProtocolControllers (one for each port on the blade).
Property
SystemCreationClassName[key]
SystemName
CreationClassName[key]
DeviceID
OtherIdentifyingInfo
Caption
Description
ElementName
IdentifyingInfoDescriptions
Table 130 LUN Mapping Instances of ProtocolControllerForUnit
Property
Antecedent
Dependent
DeviceAccess
DeviceNumber
AccessState
Dell PowerVault ML6000 SMI-S Reference Guide
Instance (one for each computer system)
CIM_ProtocolControllerMaskingCapabilities
CIM_ComputerSystem
Instances (one for each host-blade-port combination)
CIM_ComputerSystem
<Vid> <Pid> <Serial>
CIM_SCSIProtocolController
"B":<bladeIP>:.<port>:<blade host ID>:WWPN_HI:WWPNLO
{WWPN, hostname, blade serial}
"B":<bladeIP>:.<port>:<blade host ID>:WWPN_HI:WWPNLO
"FC Blade <IP>, port <port>, host: <hostname> (<WWPN>)"
CIM_SCSIProtocolController
{"Host WWPN", "Host name", "Serial Number"}
Changer Instances (one for
each time that a partition is
exposed)
CIM_SCSIProtocolController.
CIM_ChangerDevice
2 (Read/Write)
Host LUN
2 (online) if host is Online in GUI, 3 (offline) if host is offline in GUI
Drive Instances (one for each
time that a drive is exposed)
CIM_SCSIProtocolController
CIM_TapeDrive
2 (Read/Write)
Host LUN
87