Dell PowerVault ML6000 Reference Manual page 83

Table 103 Required Blade Instances of FCPort
Property
SystemCreationClassName[key]
SystemName[key]
CreationClassName[key]
DeviceID[key]
PortNumber
PermanentAddress
ElementName
OperationalStatus
NetworkAddress
PortType
ActiveFC4Types
OtherNetworkPortType
LinkTechnology
OtherLinkTechnology
ActiveCOS
UsageRestriction
Table 104 Required Blade Instances of SCSIProtocolController (LUN Mapping Disabled)
When LUN Mapping is disabled, the blade has a SCSIProtocolController representing each zone on the
blade, and since zoning is tied to target ports, this ties the blade SPC object to a blade target port.
Property
SystemCreationClassName[key]
SystemName[key]
CreationClassName[key]
DeviceID[key]
OtherIdentifyingInfo
Caption
Description
ElementName
IdentifyingInfoDescriptions
Dell PowerVault ML6000 SMI-S Reference Guide
Blade Instances (one for each blade target FC port)
"CIM_ComputerSystem"
<HID>
"SMIS_FCPort"
"B:<bladeID>:<portID>:<location>:WWN"
Example: 1
WW Port Name Format is 16 octets 1234567887654321
"CIM_FCPort"
Port Status. Example: ok(2)
0
Example: N(10)
SCSI-FCP(8)
"" since portType is N(10)
FC(4)
""
3
Front-end only(2)
Instances (one for each port on a Fibre Channel I/O
blade)
CIM_ComputerSystem
<Vid> <Pid> <Serial>
CIM_SCSIProtocolController
"B":<bladeIP>:.<port>
{blade serial}
"B":<bladeIP>:.<port>
"FC Blade <IP>, port <port>"
CIM_SCSIProtocolController
{"Serial Number"}
79