Dell PowerVault ML6000 Reference Manual page 61

Table 46 Required Container Level Instances of ConfigurationCapacity
Property
Name[key]
ObjectType[key]
MaximumCapacity
OtherTypeDescription
Property
Name[key]
ObjectType[key]
MaximumCapacity
OtherTypeDescription
Note: Total RAW capacity is computed as "number of slots" multiplied by "tape size". "Tape size" is the size
of the tape type with maximum capacity. Example, If the library supports LTO-1 and LTO-2, tape size would
be the RAW capacity of the LTO-2 tape.
Table 47 Required Properties for SystemDevice
Property
GroupComponent
PartComponent
Dell PowerVault ML6000 SMI-S Reference Guide
Instance 1
"Tape Library Maximum
Slots"
StorageMediaLocation
Slots ( 8 )
Depends on library
configuration
"Estimated number of
maximum slots"
Instance 4
"Tape Library Total
RAW Capacity"
Other (0)
Example: 400000 in
GB
"Estimated total raw
capacity"
Type
REF
REF
Instance 2
"Tape Library Number
of Tapes"
Other (0)
Same as instance 1
"Estimated number of
maximum tapes"
Instance 5
"Tape Library Total
RAW Free Capacity"
Other (0)
Example: 400000 in
GB
"Estimated total raw
Free capacity"
Description/Notes
Parent system in the association.
Logical device that is component of the
association product.
Instance 3
"Tape Library Number
of Tape Drives"
MediaAccessDevices (
Drives ) (7)
Depends on library
configuration
"Estimated number of
maximum tape drives"
Instance 6
"Tape Library Total
RAW Used Capacity"
Other (0)
Example: 0 in GB
"Estimated total raw
used capacity"
57