Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Teledyne Lecroy ZD1500
Summarization of Contents
Safety Instructions
Symbols
Symbols used in the manual and on the probe to alert to safety considerations.
Precautions
General safety precautions for connecting, environment, handling, and operation.
Probe Operation
Handling the Probe
Instructions on careful handling and storage of the precision ZD series probes.
Connecting the Probe to an Oscilloscope
Describes connecting the ZD series probes to Teledyne LeCroy oscilloscopes with ProBus interface.
Connecting the Probe to the Test Circuit
Guidance on connecting probes to test circuits to maintain performance and minimize noise.
Operation with an Oscilloscope
Details how probes integrate with oscilloscopes for automatic scaling and measurement.
Care and Maintenance
Cleaning
Instructions for cleaning the probe and cable, emphasizing gentle methods.
Calibration Interval
The recommended calibration interval is one year.
Service Strategy
Describes the service strategy for defective probes due to surface mount devices.
Replacement Parts
Information on ordering replacement accessories and common parts.
Performance Verification
Required Test Equipment
Lists the test equipment required for verifying the ZD series probe's warranted characteristics.
Verification Procedure
Output Zero Voltage
Procedure to verify the output zero voltage characteristic of the probe.
LF Attenuation Accuracy
Procedure to verify the LF attenuation accuracy of the probe.
Reference
Returning a Product for Service
Instructions for returning probes for calibration or service, including RMA process.
Need help?
Do you have a question about the ZD1500 and is the answer not in the manual?
Questions and answers