Installing The Disk System; Connect The Scsi Cables - HP 2120 User Manual

14 HP StorageWorks Disk System 2120
Keep in mind that the host bus adapter should have the highest SCSI address priority.
See Table 5 below.
SCSI Address Priority
TABLE 5
SCSI ID 7
Priority

Installing the Disk System

See the installation instructions enclosed with your rackmount kit.

Connect the SCSI Cables

SCSI Port Locations
FIGURE 8
6 5 4
Highest
1 Make sure that the host system has been powered down.
2 Connect one end of an Ultra SCSI cable (included in the shipping box) to the host
system. For the SCSI port location on your host system, refer to your host system's
documentation.
3 Connect the other end of the SCSI cable to one of the LVD/SE ports on the rear of
the disk system.
3 2 1 0 15 14 13 12 11 10 9 8
Lowest
LVD/SE
LVD/SE
SCSI
SCSI
Port
Port