Installation Wizard: Available Storage Subsystem - HP 2000fc User Manual
Hp storageworks simple san connection manager user guide (5697-0083, august 2009)
Hide thumbs
Also See for 2000fc:
- Reference manual (330 pages) ,
- Cli reference manual (282 pages) ,
- User manual (88 pages)
Table of Contents
Advertisement
Figure 3
Installation wizard: Available Storage Subsystem
6.
Select one or more types of storage subsystems (EVA and MSA) that exist in your SAN by choosing Yes
from the drop-down menu for the appropriate subsystem types. Then click OK to close this dialog box
and continue the installation.
The progress window monitors the installation. A progress bar shows the percent of the installation
completed and icons show the status of each component as it is installed, for example:
• A
icon indicates successful installation of the component.
• A
icon indicates that the component is not yet installed.
• A
icon indicates that an error occurred during installation of this component. (The final wizard
window will provide additional information about component installation errors.)
When the first component, the HP FC driver, is installed, a diagnostic window shows the HBA
properties and targets found.
7.
Click OK to close the SAN diagnostic window and continue the installation, or click Cancel to stop the
installation.
If the Simple SAN Connection Manager software component is installed on a system with EVA storage,
the Add EVA Management Account dialog box
account or to create a user account to manage your EVA.
(Figure
4) prompts you to either select an existing user
HP StorageWorks Simple SAN Connection Manager user guide
17
Advertisement
Table of Contents
