Editing An Ipsec Association; Deleting An Ipsec Association; Copying And Pasting Ipsec Associations - HP 2000fc User Manual

CAUTION: Be aware that if you click Cancel on the IPsec Configuration dialog box, all changes you have
made to IPsec associations and policies are revoked. That is, all associations and policies that you have
created, edited, deleted, copied, or pasted while the IPsec Configuration dialog box was open are
nullified.

Editing an IPsec association

To edit an IPsec association:
1. On the HBA & Switch Management menu, click Set Switch IPsec Information. (If you have more than
one switch in your SAN, the Switch Selection dialog box prompts you to select a switch, and then click
OK.)
The IPsec Configuration dialog box opens (see
Associations on the left and the existing IPsec Policies on the right.
2. Under IPsec Associations, select the association that you want to modify, and then click Edit.
The IPsec Association dialog box opens
3. Modify the existing security association settings, and then click OK to save your changes. (For an
explanation on each of the fields on the IPsec Association dialog box, see
association"
4. When you are through managing security associations, select one of the following options:
• To save your changes and close the IPsec Configuration dialog box, click OK.
• To close the IPsec Configuration dialog box without saving any changes, click Cancel.
CAUTION: Be aware that if you click Cancel on the IPsec Configuration dialog box, all changes you have
made to IPsec associations and policies are revoked. That is, all associations and policies that you have
created, edited, deleted, copied, or pasted while the IPsec Configuration dialog box was open are
nullified.

Deleting an IPsec association

To delete an IPsec association:
1. On the HBA & Switch Management menu, click Set Switch IPsec Information. (If you have more than
one switch in your SAN, the Switch Selection dialog box prompts you to select a switch, and then click
OK.)
The IPsec Configuration dialog box opens (see
Associations on the left and the existing IPsec Policies on the right.
2. Under IPsec Associations, select the association that you want to remove, and then click Delete.
3. When you are through managing security associations, click OK to save your changes and close the
IPsec Configuration dialog box. To close the IPsec Configuration dialog box without saving any
changes, click Cancel.
CAUTION: Be aware that if you click Cancel on the IPsec Configuration dialog box, all changes you have
made to IPsec associations and policies are revoked. That is, all associations and policies that you have
created, edited, deleted, copied, or pasted while the IPsec Configuration dialog box was open are
nullified.

Copying and pasting IPsec associations

To simplify the process of creating IPsec associations, you can copy an existing association, paste it,
modify it as needed, and then save it under a new name. For example, if you use the same protocols and
keys for all IPsec associations, you can configure one complete association, and then copy it to create
additional associations with different source or destination addresses.
68 Managing switches
on page 65.)
Figure 38 on page 65) and lists the existing IPsec
(Figure 39 on page 66).
Figure 38 on page 65) and lists the existing IPsec
"Creating an IPsec