Storage Deployment Wizard: Continue Creating Logical Disk (Custom Deployment); Storage Deployment Wizard: Summary (Custom Deployment) - HP 2000fc User Manual
Hp storageworks simple san connection manager user guide (5697-0083, august 2009)
Hide thumbs
Also See for 2000fc:
- Reference manual (330 pages) ,
- Cli reference manual (282 pages) ,
- User manual (88 pages)
Table of Contents
Advertisement
e. (Optional) To create another logical disk, click Add.
f. (Optional) To remove a logical disk, select it, and then click Delete.
g. When you are finished adding, editing, and deleting logical disks for this disk group or storage
pool, click Next to continue.
6.
If you have multiple disk groups (for EVA storage), the wizard window shown in
the next disk group. If you have multiple storage pools (for MSA storage), the wizard window shown in
Figure 103
each disk group or storage pool that you created in
The wizard prompts you to consider if the logical disk creation is set up correctly, as shown in
Figure
104.
Figure 104
Storage Deployment wizard: continue creating logical disk (custom deployment)
7.
To continue, click Yes. To redefine the deployment, click No.
Before proceeding with configuring the storage subsystem with the selected option, the wizard displays
a summary of the selection and resulting actions, as shown in
Figure 105
Storage Deployment wizard: summary (custom deployment)
8.
Verify the information and then select one of the following options:
• To confirm and complete the wizard, click Deploy.
• To return to previous wizard windows and review or change your selections, click Back.
• To abandon all selections made using the Storage Deployment wizard, click Cancel.
If you click Deploy, using the HP Storage System Scripting Utility (SSSU) or the subsystem VDS hardware
provider, Simple SAN Connection Manager initializes the subsystem, creates the disk groups or storage
pools, creates the LUNs, and presents the LUNs to the servers (hosts) as summarized in
If the selected subsystem already has logical disks containing data, Simple SAN Connection Manager
displays a message warning that the storage subsystem will be uninitialized and all logical disks and
their data will be deleted.
9.
To acknowledge the warning, uninitialize the storage subsystem, delete all logical disks, and start the
Storage Deployment wizard, type YES, and then click OK. To abandon this deployment, click Cancel.
130 Managing storage subsystems
appears for the next storage pool. Complete the wizard window as you did in
step
4. Then click Next to continue.
Figure
105.
Figure 102
appears for
step 5
for
Figure
105.
Advertisement
Table of Contents
