McDATA StorageWorks 64 - SAN Director Switch Planning Manual page 85

— Enable port beaconing, reset ports, and perform port
diagnostics.
— Retrieve dump files, retrieve product information files, and
perform product firmware upgrades.
— Install optional feature keys.
The SANpilot interface can be opened from a standard web browser
running Netscape Navigator 4.6 or higher or Microsoft Internet
Explorer 4.0 or higher. At the browser, enter the IP address of the
product as the Internet uniform resource locator (URL). When
prompted at a login screen, enter a user name and password. When
the interface opens, the default display is the View panel
The View panel for the Sphereon 4500 Switch is shown as an example.
Figure 2-10 View Panel (SANpilot Interface)
Task selection tabs appear at the top of the panel, a graphical
representation of product hardware (front and rear) appears at the
right side of the panel, and menu selections (View, Configure, Monitor,
Operations, and Help) appear at the left side of the panel. The task
selection tabs allow users to perform director or switch-specific tasks
and are a function of the menu selected as follows:
Product Management
(Figure 2-10).
Product Management
2
2-25