McDATA StorageWorks 64 - SAN Director Switch Planning Manual page 291

Intrepid 10000 Director:
Right and left side: 5.1 centimeters (2.0 inches).
Front and rear: 7.6 centimeters (3.0 inches).
NOTE: If the Intrepid 10000 Director is installed in a non-McDATA
equipment cabinet with a door that does not provide direct airflow
over the full height of the unit, 17.8 centimeters (7.0 inches) of front
clearance is required.
Top and bottom: No clearance required.
Sphereon 3232 Switch:
Right and left side: No clearance required.
Front and rear: 7.6 centimeters (3.0 inches).
Top and bottom: No clearance required.
Sphereon 4300 Switch:
Right and left side: 1.3 centimeters (0.5 inches).
Front and rear: 7.6 centimeters (3.0 inches).
Top and bottom: No clearance required.
Sphereon 4500 Switch:
Right and left side: 1.3 centimeters (0.5 inches).
Front and rear: 7.6 centimeters (3.0 inches).
Top and bottom: No clearance required.
Eclipse 1620 SAN Router:
Right and left side: No clearance required.
Front and rear: 7.6 centimeters (3.0 inches).
Top and bottom: No clearance required.
Eclipse 2640 SAN Router:
Right and left side: No clearance required.
Front and rear: 7.6 centimeters (3.0 inches).
Top and bottom: No clearance required.
Product Specifications
Product Specifications
A-5