Table of Contents
Advertisement
Planning Considerations for Fibre Channel Topologies
3
McDATA Products in a SAN Environment - Planning Manual
3-58
NOTE: An cascaded switch is a fabric director or switch connected to
a destination control unit and an entry switch.
c. Run the IOCP to create an input/output configuration data
set (IOCDS). The switch ID (CHPID macroinstructions) and
2-byte link address (control unit macroinstructions) are
updated in the IOCDS.
Refer to the IBM FICON Native Implementation and Reference Guide
(SG24-6266) for additional information.
10. Verify FICON devices log back in - Inspect the Node List View
and verify FICON devices (channels and control units inspected
in
step
5) log back in to the fabric as expected.
11. Verify cascaded FICON operation - Have the customer verify
operation of established logical FICON paths between channels
and control units, and verify that cascaded FICON traffic is
transmitted through the fabric as expected.
Advertisement
Table of Contents
