Figure 1-7
illustrates the switch.
Sphereon 4500 Fabric Switch
Figure 1-7
The switch provides a modular design that enables quick removal
and replacement of FRUs, including:
•
Redundant power supplies and cooling fans. The switch provides
two power supplies, each with an AC power receptacle and three
cooling fans (six fans total).
•
Up to 24 duplex SFP fiber-optic port transceivers. Shortwave laser
transceivers are available for transferring data over multimode
fiber-optic cable. Longwave laser transceivers are available for
transferring data over singlemode fiber-optic cable. Fiber-optic
cables attach to switch port transceivers with duplex LC
connectors.
NOTE: The Sphereon 4500 Switch can be purchased at a discount price with
the McDATA Flexport Technology feature. A Flexport Technology feature
switch is delivered with only eight ports enabled. When additional port
capacity is required, the remaining ports are enabled (in eight-port
increments) through purchase of a PFE key.
The switch front panel provides a combined initial machine load and
reset (IML/RESET) button, Ethernet LAN connector, port status
LEDs, port speed LEDs (green for 1.0625 Gbps operation and blue for
2.1250 Gbps operation), green power (PWR) LED, and amber system
error (ERR) LED.
Introduction to McDATA Multi-Protocol Products
Introduction to McDATA Multi-Protocol Products
1
1-19