Table of Contents
Advertisement
Preface
Laser Compliance
Statement
Federal
Communications
Commission (FCC)
Statement
Canadian EMC
Statements
United States and
Canada UL
Certification
McDATA Products in a SAN Environment - Planning Manual
xviii
All other trademarked terms, indicated by a registered trademark
symbol (®) or trademark symbol (™) on first use in this publication,
are trademarks of their respective owners in the United States or
other countries or both.
Product laser transceivers are tested and certified in the United States
to conform to Title 21 of the Code of Federal Regulations (CFR),
Subchapter J, Parts 1040.10 and 1040.11 for Class 1 laser products.
Transceivers are tested and certified to be compliant with
International Electrotechnical Commission IEC825-1 and European
Norm EN60825-1 and EN60825-2 regulations for Class 1 laser
products. Class 1 laser products are not considered hazardous. The
transceivers are designed to prevent human access to laser radiation
above a Class 1 level during normal operation or prescribed
maintenance conditions.
Products generate, use, and can radiate radio frequency energy, and if
not installed and used in accordance with instructions provided, may
cause interference to radio communications. Products are tested and
found to comply with the limits for Class A and Class B computing
devices pursuant to Subpart B of Part 15 of the FCC Rules, which are
designed to provide reasonable protection against such interference
in a residential environment. Any modification or change made to a
product without explicit approval from McDATA, by means of a
written endorsement or through published literature, invalidates the
service contract and voids the warranty agreement with McDATA.
The statements below indicate product compliance with Interference
Causing Equipment Standard (ICES) and Norme sur le Matériel
Brouiller (NMB) electromagnetic compatibility (EMC) requirements
as set forth in ICES/NMB-003, Issue 4.
•
This Class A or Class B digital apparatus complies with
Canadian ICES-003.
•
Cet appareil numérique de la classe A et classe B est conforme à la
norme NMB-003 du Canada.
The C-UL-US mark on a product indicates compliance with
American National Standards Institute (ANSI) and Standards
Council of Canada (SCC) safety requirements as tested, evaluated,
and certified by Underwriters Laboratories Inc. (UL) and
Underwriters Laboratories of Canada (ULC).
Advertisement
Table of Contents
