Runtime Leds For P700M Model - HP 381513-B21 - Smart Array P800 Controller RAID User Manual

LED ID Color
8 Green
Gas Pedal LED
status
Off
Blinking
On steadily
On steadily

Runtime LEDs for P700m model

LED ID Color
1 Amber
2 Amber
3 Amber
4 Amber
5 Green
6 Green
7 Green
8 Green
Name
CR7: Idle Task
Idle Task LED status Controller CPU activity
level
Blinking 0–25%
Off 25–50%
Off 50–75%
On steadily 75–100%
Name
CR10: Thermal Alert
CR9: System Error
CR1: Diagnostics Error
CR2: Drive Failure
CR3: Activity
CR4: Activity
CR5: Command Outstanding
CR6: Controller Heartbeat
Comments
This LED, together with the Gas Pedal LED
(previous item), indicates the amount of controller
CPU activity. For details, see the following table.
Comments
This LED is not used.
The controller ASIC has locked up and cannot
process any commands.
One of the server diagnostics utilities has detected
a controller error.
To determine which drive has failed, check the
Fault LED of each physical drive connected to the
controller.
Port 2 is active.
Port 1 is active.
The controller is working on a command from the
host driver.
When the controller is in good health, this LED
flashes every two seconds.
Diagnosing array problems 42