After You Have Installed The Raid Controller - Intel SRCS16 - RAID Controller Hardware User's Manual

9) Replace the computer cover and power up the system.
2.3

After You Have Installed the RAID Controller

After installation, you must configure the RAID Controller SRCS16 and install the operating
system driver. The Intel RAID Software User's Guide instructs you about the configuration
options and how to set them on your RAID Controller SRCS16.
After You Have Installed the RAID Controller
Replace the computer cover and reconnect the power cords. Turn power on to the
computer.
The BIOS Configuration utility prompt times out after several seconds. The second
portion of the BIOS message displays the Intel® RAID Controller SRCS16 number,
firmware version, and cache SDRAM size. The numbering of the controllers follows the
PCI slot scanning order used by the host motherboard.
When you see the message:
Press <CTRL><G> to run BIOS Console
Press the <CTRL> and <G> keys at the same time. The firmware takes several seconds
to initialize. During this time the adapter scans the Serial ATA ports.
20