Clock And Timer; Sound Features; Setting The Clock; Sleep Mode - RCA RS3965SB User Manual

Clock and Timer

Setting the clock

1. Press and hold CLOCK until the hour fl ashes on
the display.
2. Press / to set the hour and then press
CLOCK to shift to minute digits.
3. Press / to set the minute.
4. Press CLOCK to save settings.
• When system is ON, you can tap
CLOCK to display the current time
– it will display time for about 2
seconds.

Setting the timer

• For RADIO timer, tune in to a desired station.
• For CD timer, insert a CD into the unit.
1. Press and hold TIMER until ON (timer on time)
appears with the hour fl ashing.
2. For setting time, press
and then press TIMER to shift to the minute
digits.
3. Press / to set the minute.
4. Press TIMER to change to OFF (timer off time)
with hour fl ashing. Repeat steps 2 & 3 for timer
off time setting.
5. Press TIMER to select the source. Press
to select among TUNER, CD or BT (Bluetooth).
6. Press TIMER to set the volume. Adjust the
timer volume by pressing
desired volume level.
N o t e : To a v o i d s t a r t l i n g y o u o r o t h e r
individuals in your home, this product will not
turn on at a volume higher than 15.
7. Press TIMER to save settings.

Activating the timer

Tap TIMER to turn on/off the timer. The timer is
active when the clock icon
/ to set the hour
/
/ to select the
is lit.
- 8 -

Sleep mode

You can select the time interval in minutes before
the unit turns off automatically.
1. Press SLEEP to select among OFF, 120, 90, 60, 45,
30, 15, 10 and 5 minutes. The sleep icon lights
on the display when sleep mode is activated.
2. When sleep is activated, press SLEEP once to
view remaining sleep time. Press SLEEP again
when the remaining sleep time is displayed to
change the sleep time.
• Sleep is automatically de-activated when the unit
is turned off .

Sound Features

Bass boost

Press BASS to turn on/off boosting the bass
frequency. The BASS icon lights on the display when
it is activated.

Muting audio

Press on the remote control to cut or restore the
sound.

Using preset equalizer curves

Press EQ on the unit to select among FLAT, ROCK,
POP, JAZZ, CLASSIC and CUSTOM. The display
shows your selection briefly.

Creating a Custom Curve

1. Press EQ on the unit to select the CUSTOM
mode.
2. While CUSTOM is displayed, press
cycle among the displayed BASS and TREB
range levels.
3.While BASS or TREB is displayed, adjust the
volume to set the associated gain between -10
- +10.
4. Press EQ to exit.
EN
/ to