MACROMEDIA FLASH 8-DEVELOPING FLASH LITE Develop Manual page 92

Error code Message
FTPS105 This SWF is not in Flash Lite
format.
FTPS106 Mouse Event (event-name)
was ignored because it was
not triggered by Keypress.
FTPS107 The key will not be processed:
device-key. Use
FSCommand2 SetSoftKeys
to enable this key
FTPS108 Invalid FSCommand
(command-name) found.
FTPS109 FSCommand (command-
name) not supported in the
emulator, please test it on the
device.
FTPS110 Soft keys are not supported in
the FlashLite 1.0 player.
92 Warning and Error Messages (Flash Professional Only)
Description
Your application attempted to load a SWF
file whose version was not in the Flash
Lite format; Flash Lite can load other
Flash Lite SWF files or Flash 4-formatted
SWF files, only.
The emulator detected a mouse event
over a button in your Flash Lite
application. The current test device does
not support a stylus or touch-screen
interface, so you can only interact with
buttons on the screen using the emulator's
keypad or equivalent keyboard shortcuts.
You pressed one of the soft keys on the
emulator's keypad without first calling the
command. For more
SetSoftKeys
information, see "Using the soft keys
(Flash Professional Only)" on page
The specified
FSCommand()
not a valid command string.
The emulator does not support the
specified
FSCommand()
must test this SWF file on a device with
Flash Lite installed to see if the specified
command functions as expected.
The emulator detected that you pressed
one of its soft keys but your document's
SWF file's version publish setting is set to
Flash Lite 1.0. Flash Lite 1.0 does not
support soft keys.
26.
command is
command. You