Appendix: Warning And Error Messages; (Flash Professional Only); Flash Lite Emulator Error And Information Messages - MACROMEDIA FLASH 8-DEVELOPING FLASH LITE Develop Manual

APPENDIX
Warning and Error Messages

(Flash Professional Only)

This appendix lists the possible information and warning messages that the Flash Lite
emulator might generate while your testing your Flash Lite application. For more information
about these warning messages, see
on page 69.
Also see "Flash Lite error and warning messages (Flash Professional Only)" on page 74
lists errors that can occur on both the emulator and on an actual device.
Flash Lite emulator error and information
messages (Flash Professional Only)
The following table lists all the information messages that the Flash Lite emulator reports:
Error code Message
FTPA002 FSCommand is ignored.
FTPA003 loadVariables is ignored.
FTPA004 loadMovie is ignored.
"Setting emulator debug options (Flash Professional Only)"
Description
The emulator detected an
function call, which is not supported by the
selected test device. No modifications are
made to the device-specific SWF file—this
is just a warning.
The emulator detected a
function call, which is not supported by the
selected test device and content type. No
modifications are made to the device-
specific SWF file—this is just a warning.
The emulator detected a
function call, which is not supported by the
selected test device and content type. No
modifications are made to the device-
specific SWF file—this is just a warning.
which
fscommand()
loadVariables()
loadMovie()
85