MACROMEDIA FLASH 8-DEVELOPING FLASH LITE Develop Manual page 69

For more information about selecting your test devices, see
Lite content type (Flash Professional Only)" on page
Setting emulator debug options (Flash Professional
Only)
The Flash Lite emulator can send debugging messages to the Output panel while content is
running. The emulator reports the following types of information to the Output panel:
Trace messages
that are generated by a
application. For more information about using
ActionScript Language Reference.
Information messages
file size, and other information. For a list of possible information messages, see
Error Messages (Flash Professional Only)" on page
When the Information debug option is selected, the emulator also outputs the platform
capabilities for the selected device and content type. This is useful for determining what
features are available to your application on the target platform. For more information, see
"Determining platform capabilities (Flash Professional Only)" on page
Warning messages
that might affect playback. For a list of possible warning messages, see
Messages (Flash Professional Only)" on page
The settings pane in the Flash Lite test window contains controls that let you filter the type of
information that the emulator generates.
To set Flash Lite output options:
1.
Select Control > Test Movie.
2.
In the settings pane in the Flash Lite test window, do the following:
Select or deselect the Trace option.
Select or deselect the Information option.
Select or deselect the Warnings option.
trace()
that contain general information about the selected test device, SWF
that contain information about problems with your Flash Lite content
Using the Flash Lite emulator (Flash Professional Only)
"Selecting test devices and Flash
76.
function call within your Flash Lite
, see
trace() trace()
85.
85.
in Flash Lite 1.x
"Warning and
81.
"Warning and Error
69