MACROMEDIA FLASH 8-DEVELOPING FLASH LITE Develop Manual page 27

For example, consider the following
fscommand2("SetSoftKeys", "Options", "Exit");
The following image shows the result of this command on an application running on an
actual device in normal (not full-screen) mode:
If you enable full-screen mode—that is, if you call
labels that you specify as parameters to the
Consequently, in full-screen mode applications, you must create your own soft key labels, as
the following image shows:
To use the soft keys in an application:
1.
Create a new document from the Flash Lite 1.1 Series 60 device template.
For more information about device templates, see
(Flash Professional Only)" on page
2.
Open the Device Settings dialog box, and select the Standalone Player content type. Add
one of the devices in the T-Mobile > Nokia folder to your list of test devices.
SetSoftKeys
Available screen area in non-full-screen applications
Soft key labels displayed by device
SetSoftKeys
Custom soft key labels
16.
command call:
fscommand("fullscreen", true)
command are not visible.
"Using Flash Lite document templates
Using the soft keys (Flash Professional Only)
—the
27