MACROMEDIA FIREWORKS 2-USING FIREWORKS Use Manual page 111

Close the Fireworks document.
7
Switch to Dreamweaver.
8
The placed image updates to reflect the changes
made in Fireworks.
To launch and edit Fireworks graphics that are
placed in Dreamweaver 1.2:
In Dreamweaver, choose Edit > Preferences and
1
select Fireworks as an External Editor.
In Dreamweaver, choose Window > Properties to
2
open the Properties inspector if necessary.
Select an image and click the Edit Image button
3
on the Properties inspector.
Dreamweaver launches Fireworks, if it is not
already running.
Dreamweaver searches the same folder as the
graphic for a PNG file with the same name as the
placed file in Dreamweaver, which it assumes is the
Fireworks source file.
Edit the graphic in Fireworks.
4
Choose File > Export Again.
5
The Save As dialog box opens.
In the dialog box, type a file name, choose a
6
destination folder, and then click Save.
Close the Fireworks document.
7
Switch to Dreamweaver.
8
The placed image updates to reflect the changes
made in Fireworks.
Optimizing a graphic in Fireworks
In Dreamweaver 2, choose Command > Optimize in
Fireworks to open and optimize the selected image in
the Fireworks Export Preview. Make changes in the
Export Preview and then click Update to save the image
and return to Dreamweaver. Launch and optimize does
not work in Dreamweaver 1 or in Dreamweaver 1.2.
To include Dreamweaver libraries on export:
Choose Dreamweaver Library.lbi from the HTML
1
Style pop-up.
Save the file with an .LBI extension into a folder
2
named "Library" located at the site root.
If necessary, Fireworks prompts you to create this
folder.
Click Export and save your files.
3
Importing and Exporting 111