MACROMEDIA COLDFUSION STUDIO 4.5-USING COLDFUSION STUDIO Use Manual page 87

Editing Pages
Tag-specific settings
A wide range of options is available for the individual tags contained in an Allaire
CodeSweeper.
These settings cover spacing and indenting and allow you to leave the selected tag
unchanged when invoking the CodeSweeper. If you are encountering problems
parsing server-based script code, then enable the Preserve tag formatting option.
Tip
To set rules for a tag:
1. Select a CodeSweeper from the list.
2. Edit the General Settings as needed.
3. Switch to the Tag Specific Settings tab and highlight a tag name in the list.
Note that if you select the "All Other Tags" entry in the list, the rules that you select
will apply to every tag not in the list that is found in a document.
4. Edit the settings for the tag.
5. Click Update Tag to save the settings for that tag.
To add a tag and apply formatting rules:
1. Click the Add Tag button in the Tag Specific tab.
2. Enter the tag name and click OK.
3. Set rules for the tag and click Update Tag to save the settings.
To remove a tag, highlight it and click the Remove Tag button.
The Strip tag from document option is handy for getting rid of
superfluous and unwanted tags inserted by code generation tools.
79