MACROMEDIA COLDFUSION STUDIO 4.5-USING COLDFUSION STUDIO Use Manual page 81

Editing Pages
3. Click the Refresh button to update the Tag Tree as you edit the document.
You can click the Collapse button on the Tag Tree toolbar to collapse the selected tag.
Note that the tag body must be collapsed in the Tag Tree to collapse it in the document.
The default set of profiles gives you a lot of options for filtering the outline, but you can
easily customize profiles. Outline Profiles are written in Allaire's Visual Tools Markup
Language (VTML) and are saved in the \Extensions\Outline Profiles folder. You can
open any of the profiles in this folder to examine the syntax. The VTML markup
identifies the tags that are recognized in the profile.
You can manually edit a profile or create a new one in the editor or use the Outline
Profile Editor dialog box. Before making changes to a profile, it's a good idea to make a
backup of the original file.
To configure Outline Profiles:
1. Click the Configure Outline Profiles button at the top of the pane to open the
Outline Profiles dialog box.
2. Use the Add and Remove buttons in the Outline Profiles pane to edit the current tag
sets.
3. Use the Add and Remove buttons in the Recognized Tags pane to edit the tag list for
the selected set.
4. To add a caption and tool button to a tag, make selections in the Tag Settings pane.
5. Click Done to update the Tag Tree profiles.
To import an Outline Profile:
1. Click the Import button in the Configure Outline Profiles dialog box.
2. Select either a VTML definition file or a DTD file to import.
3. Click Next.
The Wizard reports the status of the import process. If the process completes
successfully, click Finish. The Import from a DTD file option creates a profile from
the language defined in the DTD.
73