Configuring The Internal Browser; Setting The Internal Browser Options - MACROMEDIA COLDFUSION STUDIO 4.5-USING COLDFUSION STUDIO Use Manual

36

Configuring the Internal Browser

The following sections describe the choices available for browsing documents and
processing pages from within ColdFusion Studio.

Setting the internal browser options

You can use the internal browser to view documents in a Web browser within the
program. Open the Options > Settings > Browse pane to set options.
You can select from these browser options:
Only one internal browser may be used at a time, but you can change this setting as
needed. Restart the program to effect the change.
If Microsoft Internet Explorer is installed on your system, you can use it as the
internal browser.
Go to http://www.microsoft.com/downloads/
If the Mozilla browser NGLayout/Gecko control is installed, you can select the
Use Netscape option.
Go to http://www.mozilla.org/
Mozilla section for setup instructions.
A built-in browser is available if you want to use it.
Be aware that the built-in browser is limited in its support of HTML and
browser extensions.
to get the latest version.
to download the latest version. See the Installing