Installing ColdFusion Server in Linux
10 After entering and confirming the passwords for the ColdFusion Administrator
11 For each option that you want to install, you are prompted to enter
12 Press Enter to begin the installation.
When the installation is complete, a shell script restarts the Web server and starts
ColdFusion Server services.
Warning
Because of potential security concerns, the ColdFusion Server team recommends
that you not install the example applications in production environments.
and ColdFusion Studio, enter the login name under which ColdFusion Server
runs.
ColdFusion Server options. Enter
The following table lists important installation option options and
considerations for ColdFusion Enterprise Edition customers:.
Option
Description
Reporting and
Accessed through the ColdFusion Administrator, this option
Archive/
provides ColdFusion application reporting statistics and the ability
Deploy
to archive and deploy ColdFusion applications.
Monitors,
Accessed through the ColdFusion Administrator, this option
Alarms, and
provides ColdFusion application performance monitoring,
Load-Balancer
threshold alarms, and hardware load-balancing integration for
Integration
Cisco LocalDirector. If you select ClusterCATS, these features is
provided through the ClusterCATS Web Administrator.
ClusterCATS
Provides software-based load-balancing and IP failover support
for ColdFusion Server. If you want the server on which you are
installing ClusterCATS to be able to assume the IP address and
HTTP traffic of a failed server in the cluster, enter y to configure
this server with failover services. For more information, see
"Preparing Your Server for ClusterCATS" on page
SNMP MIB
Provides application information to third-party applications. You
must install SNMP on Linux before installing ColdFusion Server.
For instructions, see
and
for each option to install.
y
"Installing SNMP in Red Hat" on page 41
"Configuring SNMP MIB" on page
to install the
y
135.
51.
45
Need help?
Do you have a question about the COLDFUSION 5 - INSTALING AND CONFIGURING SERVER and is the answer not in the manual?