Installing Coldfusion Server In Windows - MACROMEDIA COLDFUSION 5 - INSTALING AND CONFIGURING SERVER Manual

10

Installing ColdFusion Server in Windows

Macromedia recommends that you close all open applications before running the
Setup program. This ensures proper installation of the Merant ODBC 3.7 drivers.
This procedure describes a ColdFusion Server Enterprise Edition installation.
To install ColdFusion Server:
1
2
3
4
5
6
Close all open applications.
Log into your system using the Local Administrator account.
Open the Run dialog and browse to the
CD-ROM or an alternate location. Execute the file.
After the Welcome and Licence agreement dialogs, the Customer Information
dialog displays. Enter your information, including the ColdFusion Server license
key. You can find your ColdFusion Server license key on the product box and the
CD-ROM packaging.
The Web Server Selection dialog box displays next.
Do one of the following:
If your Web server is already installed, the Install Wizard automatically detects
it. Click the radio button for the Web server that you want ColdFusion Server to
use.
If your Web server is not listed, select Other Server and click Next. For
instructions on manually configuring your Web server to work with ColdFusion
Server, see "Configuring Web servers manually" on page
After the Choose Destination Path dialog box, the Select Components dialog
displays:
Select the ColdFusion Server components to install. When you select a
component, a brief description displays in the Description box.
Chapter 1 Installing ColdFusion Server in Windows
file on the ColdFusion Server 5
setup.exe
14.