Table of Contents
Advertisement
6
Operating
System
Installing SNMP in Windows NT 4.0 Server and Windows 2000
Server
Managed data is accessible in ColdFusion Server 5 Enterprise Edition through the
Simple Network Management Protocol (SNMP) Management Information Base
(MIB) for Advanced ColdFusion Application Management features. You can
integrate this information with your third-party system management tools. These
tools provide a way for you to manage diverse components of your enterprise from a
management station in your network.
If you want to use the ColdFusion Server MIB features, you must install SNMP before
installing ColdFusion Server. For instructions, see the following procedures.
To install the SNMP service in Windows NT 4.0:
1
2
3
Note
If you chose to overwrite new files during the SNMP installation, you must re-apply
your most recent operating system Service Pack after the SNMP installation because
the SNMP install includes some older files.
To install the SNMP service in Windows 2000:
1
2
3
4
Update
SNMP
* Windows NT 4.0 Server only
† Windows 2000 Server only
From the Start menu, select Settings > Control Panel > Network > Service Tab >
Add > SNMP Service.
The installation begins. When prompted, insert your Windows installation
CD-ROM.
Start the SNMP trap service.
From the Start menu, select Settings > Control Panel > Add/Remove Programs >
Add/Remove Windows Components.
Click Management and Monitoring Tools and Details.
Select Simple Network Management Protocol, and click OK.
To begin the installation, click Next.
Chapter 1 Installing ColdFusion Server in Windows
Where to find it
†
Required only for MIB functionality. For
instructions, see
NT 4.0 Server and Windows 2000 Server" on
page 6
and
36.
"Installing SNMP in Windows
"Configuring SNMP MIB" on page
Advertisement
Table of Contents
