Table of Contents
Advertisement
Before You Begin the Installation
Before You Begin the Installation
This section contains the following pre-installation instructions:
Required operating system patches
The following table lists the patches and packages that must be installed before to
installing ColdFusion Server 5:
Linux
Distribution
Red Hat 6.2, 7.0 compat-libstdc++ RPM
SuSE 7.0
Cobalt RAQ 3,
RAQ4, XTR
Installing SNMP in Red Hat
Managed data is accessible in ColdFusion Server 5 Enterprise Edition through the
Simple Network Management Protocol (SNMP) Management Information Base
(MIB) for Application Management features. You can integrate this information with
third-party system management tools. These tools let you manage diverse
components of your enterprise from a management station in your network.
If you want to use ColdFusion Server MIB features, you must install SNMP before
installing ColdFusion Server. For instructions, see the following procedures.
Tip
To find the version of SNMP that you are currently running, enter
Required operating system patches
Installing SNMP in Red Hat
Important Network Considerations
Upgrading from a previous version
Verifying that a Web server is running
Uninstalling ColdFusion Server 5
Patch
UCD-SNMP 4.2.1
apache.rpm
glibc-2.1.3-22
glibc-profile-2.1.3-22
glibc-devel-2.1.3-22
Red Hat 6.0 glibc patch
Where to find it
ftp://ftp.redhat.com/pub/redhat/current/
Required only for MIB functionality. For
instructions, see
"Installing SNMP in
Red Hat" on page
41.
ftp://ftp.suse.com/pub/suse/i386/
update/
http://www.cobalt.com/support/
download/index.html
http://www.cobalt.com/support/
download/index.html
http://www.cobalt.com/support/
download/index.html
ftp://ftp.redhat.com/pub/redhat/current/
41
.
snmpd -v
Advertisement
Table of Contents
Need help?
Do you have a question about the COLDFUSION 5 - INSTALING AND CONFIGURING SERVER and is the answer not in the manual?