GRASS VALLEY NETCONFIG V2.0.12 Instruction Manual page 35

NetConfig — Instruction Manual
Note It's possible that you'll see devices listed in NetConfig, but not see the appro-
priate software for them in the list or vice versa. NetConfig displays only the
device software that has been loaded on this computer (see
Load Background Information on page
Figure 34. Update Devices Dialog
4. Once you've selected a software version, NetConfig lists the devices for
which that software is appropriate in the right pane of the dialog. It also
displays the name, current software version, and IP Address for each of
those devices. In the right pane, check the boxes of all the devices you
want to update.
Note We strongly suggest updating all devices of the same type with the same
software version. To make that easier, you can use the Select All button.
Figure 35. Update Devices Dialog
5. Ensure the
Reboot when complete
screen is checked.
9).
box in the bottom left corner of the
Using NetConfig
Device Software
35