GRASS VALLEY NETCONFIG V2.0.12 Instruction Manual page 18

Discover
Button
View
Buttons
NetConfig — Instruction Manual
Note The illustration shows the toolbar set to Icon and Text mode. To change the
toolbar icon view, refer to
Figure 12. Initial NetConfig Main Screen, No Devices Present
The button is used to detect devices on the network, and the three
Discover
buttons determine how the devices are shown on the screen.
View
When devices are detected and a view is selected, the left side of the screen
displays the logical tree of the devices on the network the PC is connected
to (via the Default Gateway assigned to the PC).
The right portion of the screen is the web browser view. When you click a
device in the IP or Device views or a Facility view device with an
embedded link, the home page for that device or the embedded link is dis-
played in the web browser view
Tool Bar Views on page 39.
(Figure 13).
Using NetConfig
18