GRASS VALLEY NETCONFIG V2.0.12 Instruction Manual page 32

Networking configuration application

Table of Contents

NetConfig — Instruction Manual

• You can also click on a column heading to sort the list by that

column's data. Click on the heading again to sort the list in the

opposite direction.

• Clicking the

Re-Discover

the contents of the list box dialog.

3. Select the device on the list you wish to change by double-clicking its

name, or highlight the device and select the

Change IP Address dialog box

Figure 30. Change IP Address Dialog Box

The edit boxes in this frame display the IP address, Subnet Mask,

Gateway, and Server 1 and 2 addresses corresponding to the item

selected in the list box.

Note

Selecting multiple devices allows you to change the data for these devices to

the same values in the selected fields. The last octet of each device's IP

address is retained, however, to prevent duplicate IP addresses. This lets you,

for example, move several devices to a different subnetwork with one action.

4. Checking the boxes on the left activates the edit box and allows you to

change the data.

5. Click

to enter the new values.

button at the bottom of the screen refreshes

button to bring up the

Edit

(Figure

30).

Using NetConfig

Table of Contents

Netconfig