Setting Ip Addresses - GRASS VALLEY NETCONFIG V2.0.12 Instruction Manual

Setting IP Addresses

NetConfig — Instruction Manual
1. Use the
Device IP Addresses
the corresponding
addresses for any NetConfig compliant devices on your network. The
Change IP Addresses window
Figure 28. Change IP Addresses Window
• Scrolling the inner window to the right reveals additional informa-
tion (Server 1 and 2, if applicable) and an Online field
Figure 29. Change IP Addresses Window, Scrolled Right
2. If you wish, you can use the Select
to specify the kind of devices you want NetConfig to look for.
command on the
button in the toolbar to view or change IP
Set IP
(Figure 28) will open.
Device Type
Using NetConfig
menu pulldown, or
Configure
(Figure
pulldown in this window
29).
31