Table of Contents
Advertisement
Copy Function
Identifying A Device
Device Properties
NetConfig — Instruction Manual
Use the Copy function in the context menu shown in
device and paste it to the Facility View.
You can also identify a device on the network using the context menu
opened by right clicking on a device. Clicking on
page
21) will blink board LEDs or control panel buttons of that device for a
defined period of time (see
very helpful when multiple devices reside in the same equipment rack, and
at large facilities where devices may reside at different locations.
Right-clicking on any device in a view will also allow you to select
from the context menu to bring up a Device Properties screen similar to the
one for an 8960ENC modular module shown in
Information for the device such as its location, IP Address, description, part
number, software version, serial number and other information is reported.
Device status is also shown. The Asset Tag and Location fields can be
updated or assigned with the Inventory function in NetConfig. Refer to
Inventory Function on page 27
Figure 17. Device Properties Example
Identify Device
Device Identification on page
Figure
for more information.
Using NetConfig
Figure 16
to copy a
(Figure 16 on
38). This can be
Properties
17.
22
Advertisement
Table of Contents
