Table of Contents
Advertisement
Using NetConfig
NetConfig — Instruction Manual
4. In the Connections box, click on the connection you want to broadcast
on. If it is not at the top of the list, use the up arrow to move it to the
top.The device at the top of the list is the default gateway.
Figure 11. Adapters and Bindings Tab
Method 2 - Disable and Re-Enable Connection
1. Right-click on My Network Places and select Properties.
2. You should see two connections. Right-click on the connections you
don't want to broadcast on and select Disable.
The other connection is now the one enabled and it becomes the default
gateway.
3. Now enable the other connection. The default gateway will remain on
the correct connection.
You can launch NetConfig a number of ways, but you'll find it on the Start
menu under Grass Valley Group or an icon will be placed on the desktop
during installation. When you launch NetConfig for the first time (or when
there are no devices connected for the tool to auto-detect and there are no
logical trees under the Facility View previously created by users) the initial
window looks much like it does in
Figure
12.
Using NetConfig
17
Advertisement
Table of Contents
