Related Manuals for Torrey FS200/400
Summarization of Contents
General View Finder
Alphanumeric Indicator
Shows product weight and status messages like 'Kg', 'lb', 'OVRLOAD', 'LOWbAT'.
Low Battery Indicator
Alerts when the battery energy is too low, requiring recharge.
Zero Indicator
Shows the scale is ready for weighing; disappears when a load is applied.
NET Indicator
Indicates the 'tare' function is active, showing net weight.
AC/DC Power Supply Indicator
Turns on when the AC/DC power supply is connected.
Operation's Description
How to Weight a Product
Step-by-step guide to weighing a product on the scale.
How to Use Tare
Explains how to use the TARE function to exclude container weight.
How to Use kg/lb Conversion
How to switch between kilogram and pound units.
How to Use Zero
How to reset the scale to zero, especially after voltage variations.
How to Use Backlight
How to use the backlight for better display readability.
Use of the Battery
Low Battery Indicator
Explains the low battery warning signals and actions to take.
Counters Verification Function
Calibration Counter
Details on the calibration counter and its readings.
Configuration Counter
Details on the configuration counter and its readings.
Other Important Messages
OVERLOAD Message
Indicates exceeding maximum capacity; requires removing excess weight.
HELP Message
Appears due to excessive weight or shipping damage; requires specific actions.
NEG Message
Indicates negative weight, often due to plate removal; needs resetting.
Need help?
Do you have a question about the FS200/400 and is the answer not in the manual?
Questions and answers