Related Manuals for Lenze EVF8202-E
Summarization of Contents
1 Preface and general information
1.1 About these Operating Instructions
Overview of the purpose, content, and recommended usage of the operating instructions.
1.2 Scope of delivery
Details the specific components included in the product package.
1.3 Legal regulations
Information on applicable directives, standards, and legal compliance.
2 Safety information
2.1 General safety information
Essential safety guidelines and application notes for operating the controller.
2.2 Layout of the safety information
Explanation of safety icons, signal words, and hazard notes.
2.3 Residual hazards
Identification and description of potential residual hazards.
3 Technical data
3.1 General data/application conditions
Environmental and operational conditions for the controller.
3.2 Rated data (Operation with 150% overload)
Electrical and performance specifications, including overload conditions.
3.3 Fuses and cable cross-sections
Recommendations for fuses and cable cross-sections.
3.4 Dimensions
Physical dimensions and size specifications of the controller.
4 Installation
4.1 Mechanical installation
Guidelines for the physical mounting and placement of the controller.
4.2 Electrical installation
Instructions for wiring power and control connections.
4.3 Installation of a CE-typical drive system
Requirements for installing a CE-compliant drive system.
5 Commissioning
5.1 Before you switch on
Pre-operation checks for wiring, connections, and potential faults.
5.2 Short set-up (Factory setting)
Procedure for initial startup using factory default settings.
5.3 Adapt machine data
Parameter settings to match the controller to the specific machine.
5.4 Optimisation of the operating characteristic of the drive
Adjusting drive parameters for optimal performance and characteristics.
7 Configuration
7.1 Basics
Introduction to controller configuration and parameter organization.
7.2 Code table
Explanation of the code table structure, abbreviations, and meanings.
8 Troubleshooting and fault elimination
8.1 Troubleshooting
Guidance for diagnosing and resolving operational issues and malfunctions.
8.2 Fault analysis using the history buffer
Methods for analyzing faults using stored error messages and history buffer.
8.3 Fault indications
List of fault codes, their causes, and recommended remedies.
8.4 Reset of fault indications
Procedures for resetting fault and trip messages after issue resolution.
9 Accessories (Overview)
9.1 Accessories for all types
List of general accessories available for all product variants.
9.2 Software
Information about available software packages for the controllers.
9.3 Type-specific accessories
List of accessories specific to particular product types.
Need help?
Do you have a question about the EVF8202-E and is the answer not in the manual?
Questions and answers