Related Manuals for Lenze EVF8201-E
Summarization of Contents
1 Preface and general information
1.1 About these Operating Instructions
Provides guidance on connecting and setting up the 82XX frequency inverter, including safety information.
1.2 Scope of delivery
Details the items included in the product delivery and important checks upon receipt.
1.3 Legal regulations
Outlines the legal regulations and directives applicable to the 82XX frequency inverter.
2 Safety information
2.1 General safety information
Covers general safety and application notes for controllers, including hazard warnings and personnel qualifications.
2.2 Layout of the safety information
Explains the uniform layout of safety notes, including icons, signal words, and danger descriptions.
2.3 Residual hazards
Highlights residual hazards related to operator safety, device protection, and overspeeds.
3 Technical data
3.1 General data/application conditions
Specifies general data and application conditions for the controller, such as vibration, temperature, and noise.
3.2 Rated data (Operation with 150% overload)
Provides rated data for different controller types (8201-8204) during operation with 150% overload.
3.3 Fuses and cable cross-sections
Details recommended fuses and cable cross-sections for single drives with 150% overload.
3.4 Dimensions
Refers to mechanical dimensions which depend on the installation type.
4 Installation
4.1 Mechanical installation
Covers important notes and methods for physically installing the controller.
4.2 Electrical installation
Provides essential guidelines and notes for the electrical connection of the controller.
4.3 Installation of a CE-typical drive system
Explains how to install the controller as part of a CE-compliant drive system for EMC.
5 Commissioning
5.1 Before you switch on
Lists checks and preparations required before the initial switch-on of the controller.
5.2 Short set-up (Factory setting)
Describes the sequence for initial setup and operation according to factory settings.
5.3 Adapt machine data
Guides users through adapting machine data like speed range and acceleration/deceleration times.
5.4 Optimisation of the operating characteristic of the drive
Explains how to optimize the drive's operating characteristics by selecting control modes.
7 Configuration
7.1 Basics
Introduces the controller configuration process for adapting the drive to specific applications.
7.2 Code table
Explains how to read and interpret the code table for controller parameter settings.
8 Troubleshooting and fault elimination
8.1 Troubleshooting
Covers troubleshooting by displaying controller status, operating module indications, and maloperations.
8.2 Fault analysis using the history buffer
Explains how to use the history buffer to trace and analyze faults based on their occurrence order.
8.3 Fault indications
Lists common fault indications, their causes, and recommended remedies.
8.4 Reset of fault indications
Details the procedure for resetting fault indications, including manual and automatic methods.
9 Accessories (Overview)
9.1 Accessories for all types
Lists general accessories available for all types of the 82XX controllers.
9.2 Software
Mentions the available software for the Global Drive controllers.
9.3 Type-specific accessories
Lists accessories that are specific to different types of 82XX controllers.
Need help?
Do you have a question about the EVF8201-E and is the answer not in the manual?
Questions and answers