Related Manuals for SystemAir AxZent 560EC
Summarization of Contents
1 Introduction
1.1 Product Description
Describes the thermo centrifugal fan's features, impeller, motor placement, and casing flanges.
1.2 Intended Use
Specifies applications for clean/contaminated air up to 120°C, excluding aggressive media.
1.3 Document Purpose
Explains the manual's scope for installation, operation, and maintenance by approved personnel.
1.4 Product Overview Diagram
Illustrates key components of the fan unit with numbered labels.
1.5 Name Plate and Type Designation
1.5 Name Plate Details
Explains the information presented on the product's name plate, including type, voltage, and serial number.
1.5.1 Type Designation Breakdown
Details product name, dimensions, and motor type codes for AC and EC motors.
1.6 Product Liability
Manufacturer's disclaimer regarding damages from incorrect installation, operation, or maintenance.
2 Safety
2.1 Safety Definitions
Clarifies warning, caution, and note symbols used to highlight important safety information.
2.2 General Safety Instructions
Outlines essential safety precautions for installation, operation, and maintenance.
2.3 Personal Protective Equipment
Lists mandatory PPE such as eye protection, helmet, gloves, and footwear for safe work.
3 Transportation and Storage
Handling and Storage Guidelines
Instructions for safe transport, handling, storage conditions, and maximum storage duration.
4 Installation
4.1 Pre-Installation Checks
Requirements before installing, including accessories, location, and examining for damage.
4.2 Installation Procedures
Steps for product positioning, orientation, and vibration reduction using mounting accessories.
5 Electrical Connection
5.1 Pre-Connection Checks
Verifies electrical connection suitability, wiring diagrams, and clean environment.
5.2 Power Supply Connection
Details on connecting to the power source, circuit breakers, and RCDs.
5.3 Motor Control & Protection
Covers speed controllers and motor protection for EC and AC motors.
6 Commissioning
6.1 Pre-Commissioning Checks
Verifies installation, electrical connections, safety devices, and air pathways.
6.2 Commissioning Procedure
Step-by-step guide to start, test, and verify product operation and vibrations.
7 Operation
7.1 Starting EC and AC Motors
Procedures for starting the fan with EC motors using 0-10V signals and AC motors.
7.2 Stopping the Product
Details normal stop procedures via speed controller and emergency stop via safety switch.
8 Maintenance and Spare Parts
8.1 Maintenance Schedule and Cleaning
Outlines routine maintenance tasks, intervals, and safe cleaning methods for the product.
8.2 Obtaining Spare Parts
Procedure for ordering replacement parts, including contact information and required serial number.
9 Troubleshooting
9.1 Operational Issues
Addresses problems like rough operation, insufficient air output, and unusual noise.
9.2 Component & Speed Issues
Covers issues with thermal contacts, fan speed, motor rotation, and overheating.
10 Disposal
10.1 Product Disassembly and Disposal
Instructions for safe disassembly, recycling, and disposal according to regulations.
11 Warranty Information
Warranty Conditions
Details requirements for warranty claims, including correct installation and maintenance.
12 Technical Data
12.1 Technical Data Overview & Dimensions
Key specifications, IP class, and physical measurements for different fan models.
12.2 Wiring Diagrams - General and EC Speed Controllers
Illustrates wire colors and wiring for EC motor speed controllers (MTP 10/20).
12.3 Wiring Diagrams - EC Basic & Other Controllers
Shows wiring configurations for various EC controllers: EC-Basic, MTV, S-5EC/FRQ, EC-Vent.
12.4 Wiring Diagrams - EC ON/OFF Controls
Details wiring diagrams for EC motors using ON/OFF controls (CO2RT, IR24-P).
13 Accessory Overview
Product Accessories
Visual guide illustrating available accessories like grilles, silencers, and mounting feet.
14 EU Declaration of Conformity
EU Compliance Statement
Declares adherence to relevant EU directives and harmonized standards for machinery and EMC.
15 UKCA Declaration of Conformity
UKCA Compliance Statement
Declares adherence to UK regulations for machinery, EMC, and hazardous substances.
Need help?
Do you have a question about the AxZent 560EC and is the answer not in the manual?
Questions and answers