Related Manuals for norbar 18109.B12
Summarization of Contents
Safety
General Safety Rules
Essential guidelines for safe operation, installation, and maintenance of the tool.
Projectile Hazards
Risks associated with high-velocity projectiles from tool or workpiece failure.
Entanglement Hazards
Dangers from loose clothing, jewelry, or hair interacting with rotating parts.
Operating Hazards
Risks to hands from crushing, impacts, cuts, abrasions, and heat during use.
Repetitive Motions Hazards
Discomfort or injury from repeated movements and awkward postures during operation.
Accessory Hazards
Risks associated with using incorrect or incompatible accessories and consumables.
Workplace Hazards
Dangers related to the work environment, such as slips, trips, and explosive atmospheres.
Dust and Fume Hazards
Health risks from airborne dust and fumes generated during tool operation.
Noise Hazards
Risks of hearing loss and other problems from exposure to high noise levels.
Vibration Hazards
Potential for disabling nerve and blood supply damage from tool vibration.
Additional Safety Instructions for Pneumatic Power Tools
Specific safety precautions for tools powered by compressed air.
PTM Specific Safety Instructions
Safety guidelines unique to the PTM series stall tools.
Markings on Tool
Explains the meaning of pictograms and markings found on the tool itself.
Introduction
Parts Included
Lists all components supplied with the PneuTorque® tool.
Features and Functions
Twin Motor
Describes the dual-motor system for fast rundown and final torque.
Trigger
Explains the trigger's function in controlling air flow and torque application.
Clockwise/Counter-Clockwise Selector
Details the selector for choosing tightening or loosening direction.
Reaction Bar
Explains how the reaction bar contains torque forces to protect the operator.
Non-Impacting
Highlights the low vibration levels for operator comfort and reduced tool wear.
Replaceable Drive Square
Discusses the designed-to-shear drive square for tool protection and easy replacement.
Set Up Instructions
PneuTorque® Hanger
Instructions on using the hanger with a balancer for comfortable tool handling.
Connecting Air Supply
Guidance on connecting the tool to the compressed air supply system.
Air Lubrication
Procedures for setting up and maintaining air lubrication via the Lubro Control Unit.
Torque Reaction
Instructions on fitting the correct reaction bar or plate for safe operation.
Clockwise/Counter-Clockwise Operation
Setting Torque to Tighten Fastener
How to use the air pressure graph to set the required torque output.
Operating Instructions
Tightening
Step-by-step guide for using the tool to tighten fasteners.
Releasing
Step-by-step guide for using the tool to release fasteners.
Dual Trigger Tools
Operation specifics for tools equipped with the Dual Trigger Module.
Maintenance
Maintenance Air Lubrication
Guidance on replenishing hydraulic oil in the Lubro Control Unit.
Gearbox
Information regarding the gearbox lubrication and maintenance.
Silencer
Instructions for replacing the silencer component of the tool.
Drive Square
Procedures for replacing the output drive square, especially after shearing.
Calibration
Recommendation for periodic recalibration to maintain tool accuracy.
Cleaning
Best practices for cleaning the tool to ensure safety and longevity.
Disposal
Information on recycling considerations for tool components.
Need help?
Do you have a question about the 18109.B12 and is the answer not in the manual?
Questions and answers