Advertisement
Quick Links
The secondary handle is an easy to fit and
versatile accessory which offers additional
support and ease of handling when applying
torque with Norbar's powered multipliers. The
secondary handle is designed to fit directly to
those powered multipliers that have a location
grove in the annulus, covered by a band, as
shown below. Remove this band before fitting
the secondary handle.
Norbar Torque Tools Ltd
Wildmere Road, Banbury, Oxfordshire, OX16 3JU
NORBAR TORQUE TOOLS LTD
Wildmere Road, Banbury,
Oxfordshire, OX16 3JU
UNITED KINGDOM
Tel + 44 (0)1295 270333
Email enquiry@norbar.com
To find your local Norbar
company or distributor, please
scan the QR code below.
View our 'How to Use a Torque Wrench'
Video at:
www.norbar.com/HowtoUseATorqueWrench
www.norbar.com
Secondary
Secondary
Handle
Handle
Instruction Part No. 34439 | Issue 2
© Norbar Torque Tools Ltd 2022
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for norbar Secondary Handle
Summary of Contents for norbar Secondary Handle
- Page 1 The secondary handle is an easy to fit and versatile accessory which offers additional NORBAR TORQUE TOOLS LTD support and ease of handling when applying Wildmere Road, Banbury, torque with Norbar’s powered multipliers. The Oxfordshire, OX16 3JU secondary handle is designed to fit directly to...
- Page 2 Remove both screws with a 4mm Allen Key Position the Secondary Handle over the groove of the gearbox and tighten both screws to 9 N·m. The secondary handle has been designed so that it can freely rotate around the tool’s gearbox. This means that the handle does not become a trap hazard.
Need help?
Do you have a question about the Secondary Handle and is the answer not in the manual?
Questions and answers