Table of Contents
Advertisement
INSTALLER SECTION
Product Summary
About this section
This section of the manual provides technical
information for installing and programming the
ComPoint system. It also provides detailed
descriptions of the system functions.
Product summary
The ComPoint system uses one or more central
hubs, each of which supports up to 6 keypads.
Each keypad is addressable by its own unique
ID number assigned by the hub.
ComPoint connects with CAT-5 cable, which
conveys power, ground, audio, and data
ISK2
ISK3
Six-zone ComPoint system with Advanced Keypads and Door Strike Release Modules
16
ISH1
ISDR1
between the components. The cable length limit
for any zone or door station is 250 feet (76 m).
The system can include one or two door sta-
tions connected to hub #1. Each door station
has its own unique ID number, permanently
assigned in the system firmware.
Each door station may also have a door strike
release module wired in line between the hub
and the station.
Simple system programming is required to
assign the hub ID numbers, doorbell chimes,
and when ISK2 Advanced Keypads are used,
zone and door labels.
ISDR1
ISPS
ISK3
Hide quick links:
Advertisement
Table of Contents
