Door Station Call - Russound COMPOINT SYSTEM Instruction Manual

Intercom (cont'd)
If the selected zone is in Do Not Disturb
mode, the display alternately shows the
zone label and DND at 1-second intervals
and the DND key blinks rapidly for 7
seconds.
Receiving an intercom. When the Talk key
is pressed on the sending keypad, the
receiving keypad indicates which zone is
sending the intercom. Also, both the send-
ing and receiving keypads sound a single
ping to let you know you can reply hands
free within 7 seconds. After the 7 seconds,
the keypads sound a double ping to signal
the end of the hands-free reply period.
After the double ping, you can reply within
30 seconds by pressing and holding the
Talk key while you speak. After 30 seconds
you can no longer reply, but you can start
another intercom session to the zone that
sent the original message.

Door station call

A visitor can ring the doorbell and start a
door station call by simply pressing and
releasing the Call key.
When the Call key is pressed, all keypads
indicate the calling door station for 15 sec-
onds. The D1 or D2 key on the Basic
Keypad blinks red and the display on the
Advanced Keypad shows Door1, Door2, or
an installer-assigned door label.
Using the Call key on a Door Station
Door call indication on Basic and Advanced keypads
The keypads also sound a doorbell chime,
as long as they aren't in Do Not Disturb
mode and a chime option is selected on the
hub. Additionally, the door station can ring
a traditional doorbell system as well.
USER SECTION
Operation
11