Planet VR-300F User Manual
  1. Manuals
  2. Brands
  3. Planet Manuals
  4. Network Router
  5. VR-300F
  6. User manual

Planet VR-300F User Manual

Enterprise 5-port 10/100/1000t vpn security router
Hide thumbs Also See for VR-300F:
Table of Contents

Advertisement

Quick Links

Download this manual
Enterprise 5-Port 10/100/1000T VPN Security Router
VR-300 series
Enterprise 5-Port
10/100/1000T VPN Security
Router
VR-300 Series
- 1 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VR-300F and is the answer not in the manual?

Questions and answers

Related Manuals for Planet VR-300F

Summary of Contents for Planet VR-300F

  • Page 1 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 Series - 1 -...
  • Page 2 Information in this User’s Manual is subject to change without notice and does not represent a commitment on the part of PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s Manual.
  • Page 3 WEEE separately. Trademarks The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hardware and software products by their trade names. In most, if not all cases, these designations are claimed as trademarks or registered trademarks by their respective companies.

  • Page 4: Table Of Contents

    Hardware Installation ....................44 Chapter 3. Preparation ......................45 Requirements ......................45 Setting TCP/IP on your PC ..................46 Planet Smart Discovery Utility .................. 53 Chapter 4. Web-based Management .................. 55 Introduction ......................55 Logging in to the VPN Router .................. 55 Main Web Page ......................
  • Page 5 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.5.5 Routing ....................82 4.5.6 WAN IPv6 Setting .................. 84 4.5.7 DHCP ..................... 84 4.5.8 DDNS ..................... 86 4.5.9 MAC Address Clone ................88 Security ........................89 4.6.1 Firewall ....................90 4.6.2 MAC Filtering ..................
  • Page 6 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.10.3 MAC ACL ..................... 127 4.10.4 WiFi Advanced ..................128 4.10.5 WiFi Statistics ..................129 4.10.6 Connection Status ................129 4.11 Maintenance ......................130 4.11.1 Administrator ..................130 4.11.2 Date and Time ..................131 4.11.3...

  • Page 7: Chapter 1. Product Introduction

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Chapter 1. Product Introduction Thank you for purchasing PLANET VPN Router, VR-300 Series. The descriptions of these models are as follows: VR-300 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300P Enterprise 4-Port 10/100/1000T 802.3at PoE + 1-Port 10/100/1000T VPN Security Router...

  • Page 8: Package Contents

    The demand for information security has become the primary concern for the enterprises. To fulfill this demand, PLANET has launched the VR-300 series VPN Security Router, an all-in-one appliance that carries several main categories across your network security deployments: Cyber security, SPI firewall security protection, policy auditing (Content Filtering, VPN Tunnel and MAC/IP Filtering), AP controller, captive portal, RADIUS and easy management (Setup Wizard, DHCP Server and Dashboard).
  • Page 9 Built-in Unique PoE Functions for Powered Devices Management (PoE model only) The VR-300 series is capable of having a maximum of up to 120 watts of power output and can deliver up to 36W for each port. It also features the following special PoE management functions: ...
  • Page 10 HTTPS web and SNMP management interfaces. With the built-in web-based management interface, the VR-300 series offers an easy-to-use, platform independent management and configuration facility. The VR-300 series supports SNMP and it can be managed via any management software based on the standard SNMP protocol.

  • Page 11: Topology

    WAN fail-over features. Furthermore, the VR-300 series can connect dual IPv4/v6 WANs with up to two different ISPs and supports many popular security features including Content Filtering to block specific URL feature that can automatically resolve the IP address corresponding to all.
  • Page 12 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series - 12 -...

  • Page 13: Features

     High Availability, AP Controller, Captive Portal and RADIUS  Compliant with the IEEE 802.3at PoE+ with PD alive check and schedule management  Planet Universal Network Management System and CloudViewer app supported  Hardware  5 10/100/1000BASE-T RJ45 ports ...
  • Page 14 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series  Provides multiple adjustable transmit power control  High-speed wireless data rate of up to 18Gbps (600Mbps for 2.4GHz and 1200Mbps for 5GHz)  Power over Ethernet (PoE model only)  Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE ...
  • Page 15  Port forwarding   SNMP  DHCP server/NTP client  MAC address clone  DDNS: PLANET DDNS, PLANET Easy DDNS, DynDNS and No-IP  Cybersecurity  Others  Setup wizard  Dashboard for real-time system overview  Supported access by HTTP or HTTPS ...

  • Page 16: Product Specifications

    Multicast IGMP Proxy NAT Throughput Max. 900Mbps Outbound Load Balancing Supported algorithms: Weight IPv4, IPv6, TCP/IP, UDP, ARP, HTTP, HTTPS, NTP, DNS, PLANET Protocol DDNS, PLANET Easy DDNS, DHCP, , PPPoE, SNMPv1/v2c/v3, HA (High Availability) Captive Portal RADIUS Server/Client Key Features...
  • Page 17 DES, 3DES, AES or AES-128/192/256 encrypting Authentication Methods MD5/SHA-1/SHA-256/SHA-384/SHA-512 authentication algorithm Management Web browser Basic Management Interfaces SNMP v1, v2c PLANET Smart Discovery utility/UNI-NMS supported Secure Management Interfaces SSHv2, TLSv1.2, SNMP v3 System Log System Event Log Setup wizard Dashboard...
  • Page 18 IGMP Proxy Multicast Max. 900Mbps NAT Throughput Outbound Load Balancing Supported algorithms: Weight IPv4, IPv6, TCP/IP, UDP, ARP, HTTP, HTTPS, NTP, DNS, PLANET Protocol DDNS, PLANET Easy DDNS, DHCP, , PPPoE, SNMPv1/v2c/v3, HA (High Availability) Captive Portal RADIUS Server/Client Key Features...
  • Page 19 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Auto reboot Diagnostics Standards Conformance Regulatory Compliance CE, FCC Environment Specifications Temperature: 0 ~ 50 degrees C Operating Relative Humidity: 5 ~ 95% (non-condensing) Temperature: -10 ~ 60 degrees C Storage Relative Humidity: 5 ~ 95% (non-condensing)
  • Page 20 IGMP Proxy Multicast Max. 900Mbps NAT Throughput Outbound Load Balancing Supported algorithms: Weight IPv4, IPv6, TCP/IP, UDP, ARP, HTTP, HTTPS, NTP, DNS, PLANET Protocol DDNS, PLANET Easy DDNS, DHCP, , PPPoE, SNMPv1/v2c/v3, HA (High Availability) Captive Portal RADIUS Server/Client Key Features...
  • Page 21 DES, 3DES, AES or AES-128/192/256 encrypting Authentication Methods MD5/SHA-1/SHA-256/SHA-384/SHA-512 authentication algorithm Management Web browser Basic Management Interfaces SNMP v1, v2c PLANET Smart Discovery utility/UNI-NMS supported Secure Management Interfaces SSHv2, TLSv1.2, SNMP v3 System Log System Event Log Setup wizard Dashboard...
  • Page 22 IGMP Proxy Multicast Max. 900Mbps NAT Throughput Outbound Load Balancing Supported algorithms: Weight IPv4, IPv6, TCP/IP, UDP, ARP, HTTP, HTTPS, NTP, DNS, PLANET Protocol DDNS, PLANET Easy DDNS, DHCP, , PPPoE, SNMPv1/v2c/v3, HA (High Availability) Captive Portal RADIUS Server/Client Key Features...
  • Page 23 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Auto reboot Diagnostics Standards Conformance Regulatory Compliance CE, FCC Environment Specifications Temperature: 0 ~ 50 degrees C Operating Relative Humidity: 5 ~ 95% (non-condensing) Temperature: -10 ~ 60 degrees C Storage Relative Humidity: 5 ~ 95% (non-condensing)
  • Page 24 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series VR-300W5 Product Wi-Fi 5 AC1200 Dual Band VPN Security Router Hardware Specifications 5 10/100/1000BASE-T RJ45 Ethernet ports including 3 LAN ports (Port-1 to Port-3) Ethernet 1 LAN/WAN port (Port-4) 1 WAN port (Port-5) USB Port 1 USB 3.0 port for system configuration backup and restoration...
  • Page 25 IGMP Proxy Multicast NAT Throughput Max. 900Mbps Outbound Load Balancing Supported algorithms: Weight IPv4, IPv6, TCP/IP, UDP, ARP, HTTP, HTTPS, NTP, DNS, PLANET Protocol DDNS, PLANET Easy DDNS, DHCP, , PPPoE, SNMPv1/v2c/v3, HA (High Availability) Captive Portal Key Features RADIUS Server/Client...
  • Page 26 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Statistics Connections status Auto reboot Diagnostics Standards Conformance Regulatory Compliance CE, FCC Environment Specifications Temperature: 0 ~ 50 degrees C Operating Relative Humidity: 5 ~ 95% (non-condensing) Temperature: -10 ~ 60 degrees C...
  • Page 27 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series PD alive check PoE Management Scheduled power recycling PoE schedule PoE usage monitoring Wireless IEEE 802.11 b/g/n 2.4 GHz Standard IEEE 802.11 a/n/ac 5 GHz Band Mode 2.4G / 5G concurrent mode America FCC: 2.412~2.462GHz...
  • Page 28 IGMP Proxy Multicast Max. 900Mbps NAT Throughput Supported algorithms: Weight Outbound Load Balancing IPv4, IPv6, TCP/IP, UDP, ARP, HTTP, HTTPS, NTP, DNS, PLANET Protocol DDNS, PLANET Easy DDNS, DHCP, , PPPoE, SNMPv1/v2c/v3, HA (High Availability) Captive Portal Key Features RADIUS Server/Client...
  • Page 29 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series - 29 -...
  • Page 30 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series VR-300W6A Product Wi-Fi 6 AX2400 2.4GHz/5GHz VPN Security Router Model VR-300W6A Hardware Specifications 5 10/100/1000BASE-T RJ45 Ethernet ports including 3 LAN ports (Port-1 to Port-3) Ethernet 1 LAN/WAN port (Port-4) 1 WAN port (Port-5) USB Port 1 USB 3.0 port for system configuration backup and restoration...
  • Page 31 IGMP Proxy Multicast Max. 900Mbps NAT Throughput Outbound Load Balancing Supported algorithms: Weight IPv4, IPv6, TCP/IP, UDP, ARP, HTTP, HTTPS, NTP, DNS, PLANET Protocol DDNS, PLANET Easy DDNS, DHCP, , PPPoE, SNMPv1/v2c/v3, HA (High Availability) Captive Portal Key Features RADIUS Server/Client...
  • Page 32 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Planet CloudViewer APP Secure Management Interfaces SSHv2, TLSv1.2, SNMP v3 System Log System Event Log Setup wizard Dashboard System Status/Service Others Statistics Connections Status Auto reboot Diagnostics Standards Conformance Regulatory Compliance CE, FCC...
  • Page 33 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Wireless IEEE 802.11a/n/ac/ax 5GHz Standard IEEE 802.11g/b/n/ax 2.4GHz Band Mode 2.4G / 5G selectable mode America FCC: 2.412~2.462GHz 2.4GHz Europe ETSI: 2.412GHz~2.472GHz Frequency Range America FCC: 5.180~5.240GHz, 5.745~5.825GHz 5GHz Europe ETSI: 5.180~5.700GHz America FCC: 1~11 2.4GHz...
  • Page 34 Multicast IGMP Proxy Max. 900Mbps NAT Throughput Outbound Load Balancing Supported algorithms: Weight IPv4, IPv6, TCP/IP, UDP, ARP, HTTP, HTTPS, NTP, DNS, PLANET Protocol DDNS, PLANET Easy DDNS, DHCP, , PPPoE, SNMPv1/v2c/v3, HA (High Availability) Captive Portal Key Features RADIUS Server/Client...
  • Page 35 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series VR-300W6 Product Wi-Fi 6 AC1800 Dual Band VPN Security Router Hardware Specifications 5 10/100/1000BASE-T RJ45 Ethernet ports including 3 LAN ports (Port-1 to Port-3) Ethernet 1 LAN/WAN port (Port-4) 1 WAN port (Port-5) USB Port 1 USB 3.0 port for system configuration backup and restoration...
  • Page 36 IGMP Proxy Multicast NAT Throughput Max. 900Mbps Outbound Load Balancing Supported algorithms: Weight IPv4, IPv6, TCP/IP, UDP, ARP, HTTP, HTTPS, NTP, DNS, PLANET Protocol DDNS, PLANET Easy DDNS, DHCP, , PPPoE, SNMPv1/v2c/v3, HA (High Availability) Captive Portal Key Features RADIUS Server/Client...
  • Page 37 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series SNMP v1, v2c PLANET Smart Discovery utility/UNI-NMS supported Planet CloudViewer APP Secure Management Interfaces SSHv2, TLSv1.2, SNMP v3 System Log System Event Log Setup wizard Dashboard System status/service Others Statistics Connections status...
  • Page 38 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series PoE schedule PoE usage monitoring Wireless IEEE 802.11a/n/ac/ax 5GHz Standard IEEE 802.11g/b/n/ax 2.4GHz Band Mode 2.4G / 5G concurrent mode 2.4GHz 2.4GHz Frequency Range 5GHz 5GHz 2.4GHz 2.4GHz Operating Channels 5GHz 5GHz...
  • Page 39 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Max. 900Mbps NAT Throughput Outbound Load Balancing Supported algorithms: Weight IPv4, IPv6, TCP/IP, UDP, ARP, HTTP, HTTPS, NTP, DNS, PLANET Protocol DDNS, PLANET Easy DDNS, DHCP, , PPPoE, SNMPv1/v2c/v3, HA (High Availability) Captive Portal Key Features...

  • Page 40: Chapter 2. Hardware Introduction

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Chapter 2. Hardware Introduction 2.1 Physical Descriptions Front View VR-300 VR-300F VR-300W5 VR-300W6A VR-300W6  LAN Per 10/100/1000Mbps PoE port (Port-1 to Port-4) Color Function To indicate the port is running at 1000Mbps or 100Mbps or 10Mbps Lights.
  • Page 41 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series  WAN Per 10/100/1000Mbps RJ45 port (Port and Port-5) Color Function To indicate the port is running at 1000Mbps or 100Mbps or 10Mbps Lights. and successfully established LNK/ACT Green To indicate that the router is actively sending or receiving data over Blink: that port.
  • Page 42 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series  LAN Per 10/100/1000Mbps PoE port (Port-1 to Port-4) Color Function To indicate the port is running at 1000Mbps or 100Mbps or 10Mbps and Lights. successfully established LNK/ACT Green To indicate that the router is actively sending or receiving data over that Blink: port.
  • Page 43 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series VR-300W6 VR-300P VR-300PW5 and VR-300PW6A VR-300PW6 Interface For compatibility with electrical outlet standard in most areas of the world, the device’s power supply automatically adjusts to line power in the range of 100-240V AC and 50/60Hz.

  • Page 44: Hardware Installation

    VR-300 series 2.2 Hardware Installation To install the VR-300 Series on desktop, simply follow the following steps: Step 1: For wireless models, fasten the 2.4G/5G antennas to the 2.4G/5G antenna connectors. And you can bend the antennas to fit your actual needs.

  • Page 45: Chapter 3. Preparation

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Chapter 3. Preparation Before getting into the device’s web UI, user has to check the network setting and configure PC’s IP address. 3.1 Requirements User is able to confirm the following items before configuration: 1.

  • Page 46: Setting Tcp/Ip On Your Pc

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 3.2 Setting TCP/IP on your PC The default IP address of the VPN router is 192.168.1.1, and the DHCP Server is on. Please set the IP address of the connected PC as DHCP client, and the PC will get IP address automatically from the VPN router.
  • Page 47 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 2. Click "Change adapter settings". 3. Right-click on the Local Area Connection and select Properties. - 47 -...
  • Page 48 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties or directly double-click on Internet Protocol Version 4 (TCP/IPv4). - 48 -...
  • Page 49 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 5. Select "Use the following IP address" and "Obtain DNS server address automatically", and then click the “OK” button. - 49 -...
  • Page 50 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Windows 10 If you are using Windows 10, please refer to the following: 1. In the search box on the taskbar, type “View network connections”, and then select View network connections at the top of the list.
  • Page 51 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 2. Right-click on the Local Area Connection and select Properties. 3. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties or directly double-click on Internet Protocol Version 4 (TCP/IPv4). - 51 -...
  • Page 52 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4. Select "Use the following IP address" and "Obtain DNS server address automatically", and then click the “OK” button. - 52 -...

  • Page 53: Planet Smart Discovery Utility

    VR-300 series 3.3 Planet Smart Discovery Utility For easily listing the router in your Ethernet environment, the search tool -- Planet Smart Discovery Utility -- is an ideal solution. The following installation instructions are to guide you to running the Planet Smart Discovery Utility.
  • Page 54 3. To click the “Control Packet Force Broadcast” function, it allows you to assign a new setting value to the device under a different IP subnet address. 4. Press the “Connect to Device” button and the Web login screen appears. Press the “Exit” button to shut down the Planet Smart Discovery Utility. - 54 -...

  • Page 55: Chapter 4. Web-Based Management

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Chapter 4. Web-based Management This chapter provides setup details of the device’s Web-based Interface. 4.1 Introduction The device can be configured with your Web browser. Before configuring, please make sure your PC is under the same IP segment with the device.

  • Page 56: Main Web Page

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.3 Main Web Page After a successful login, the main web page appears. The web main page displays the web panel, main menu, function menu, and the main information in the center.
  • Page 57 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series The main menu displays the product name, function menu, and main information in the center. Via the Web management, the administrator can set up the device by selecting the functions those listed in the...

  • Page 58: System

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.4 System Use the System menu items to display and configure basic administrative details of the router. The System menu shown in Figure 4-5 provides the following features to configure and monitor system.
  • Page 59 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Connection Status Display the DHCP client table and the ARP table SFP Module Information Display the physical or operational status of an SFP module via the SFP Module Information page (VR-300F and VR-300FP...

  • Page 60: Setup Wizard

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.4.1 Setup Wizard The Wizard will guide the user to configuring the router easily and quickly. There are different procedures in different operation modes. According to the operation mode you switch to, please follow...
  • Page 61 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-7: Setup Wizard – LAN Configuration Object Description IP Address Enter the IP address of your router. The default is 192.168.1.1. An address code that determines the size of the network. Normally Subnet Mask use 255.255.255.0 as the subnet mask.
  • Page 62 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-9: Setup Wizard – WAN 2 Configurations Mode 1 -- Static IP Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter the IP Address, Netmask, Default Gateway and DNS Server provided to you by your ISP.
  • Page 63 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Press this button for the next step. Next Press this button for the previous step. Previous Press this button to undo any changes made locally and revert Cancel to previously saved values.
  • Page 64 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series The SPI Firewall prevents attack and improper access to network SPI Firewall resources. The default configuration is enabled. SYN Flood is a popular attack way. DoS and DDoS are TCP protocols. Hackers like using this method to make a fake connection Block SYN Flood that involves the CPU, memory, and so on.
  • Page 65 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-13: Setup Wizard – Setup Completed Object Description Finish Press this button to save and apply changes. Previous Press this button for the previous step. - 65 -...

  • Page 66: Dashboard

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.4.2 Dashboard The dashboard provides an overview of system information including connection, port, and system status as shown in Figure 4-14. Figure 4-14: Dashboard WAN/LAN Connection Status Object Description The status means WAN is connected to Internet and LAN is connected.

  • Page 67: Status

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series USB port is not in use. Wireless Status Object Description Wireless is in use. Wireless is not in use. System Information Object Description Display the CPU loading Memory Display the memory usage...

  • Page 68: Statistics

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-15: Status 4.4.4 Statistics This page displays the number of packets that pass through the router on the WAN and LAN. The statistics are shown in Figure 4-16. Figure 4-16: Statistics...

  • Page 69: Connection Status

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.4.5 Connection Status The page will show the DHCP Table and ARP Table. The status is shown in Figure 4-17. Figure 4-17: Connection Status 4.4.6 SFP Module Information This page shows the operational status, such as the transceiver type, speed, wavelength, optical output power, optical input power, temperature, laser bias current and transceiver supply voltage in real time.
  • Page 70 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series fails. • Distance (m) Display the support distance of current SFP module; the distance value is obtained from the SFP module. • Temperature (C) Display the temperature of current SFP DDM module; the temperature value is gotten from the SFP DDM module.

  • Page 71: High Availability

    VR-300 series 4.4.7 High Availability High Availability (HA) is a system redundancy where two routers of VR-300 series can be set up in a master/slave configuration. The master router provides the Internet connection but, in case hardware or WAN connectivity fails, the slave (backup) router automatically will take over Internet connection. It provides redundant hardware and software that make the system available despite failures.

  • Page 72: Radius

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.4.8 RADIUS Remote Authentication Dial-In User Service (RADIUS) is a security authentication client/server protocol that supports authentication, authorization and accounting. The RADIUS Server page is shown in Figure 4-20. Figure 4-20: RADIUS Server...

  • Page 73: Captive Portal

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.4.9 Captive Portal Captive portal service gives the ability to organize a public (or guest) Wi-Fi zone with user authorization. A captive portal is the authorization page that forcibly redirects users who connect to the public network before accessing the Internet.

  • Page 74: Snmp

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.4.10 SNMP This page provides SNMP setting of the router as shown in Figure 4-23. Figure 4-23: SNMP Object Description Enable SNMP Disable or enable the SNMP function. The default configuration is enabled.

  • Page 75: Nms

    VR-300 series 4.4.11 NMS The VR-300 series can support both NMS controller and CloudViewer Server for remote management. PLANET's NMS Controller is a Network Management System that can monitor all kinds of deployed network devices, such as managed switches, media converters, routers, smart APs, VoIP phones, IP cameras, etc., compliant with the SNMP Protocol, ONVIF Protocol and PLANET Smart Discovery utility.
  • Page 76 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series The CloudViewer Server – Internet screens in Figure 4-26 appear. Figure 4-26 CloudViewer Server – Internet Configuration Page Object Description • Email The email registered on CloudViewer Server • The password of your CloudViewer account Password •...

  • Page 77: Network

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.5 Network The Network function provides WAN, LAN and network configuration of the router as shown in Figure 4-27. Figure 4-27: Network Menu Object Description Allows setting WAN interface. Allows setting WAN Advanced settings.
  • Page 78 Disable or enable the IGMP function. IGMP The default configuration is disabled. IPv6 Allows setting IPv6 WAN interface. DHCP Allows setting DHCP Server. Allows setting DDNS and PLANET DDNS. DDNS MAC Address Allows setting WAN MAC Address Clone. Clone - 78 -...

  • Page 79: Wan

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.5.1 WAN This page is used to configure the parameters for Internet network which connects to the WAN port of the router as shown in Figure 4-28. Here you may select the access method by clicking the item value of WAN access type.

  • Page 80: Wan Advanced

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Netmask Enter the Subnet Mask assigned by your ISP. Gateway Enter the Gateway assigned by your ISP. DNS Server The DNS server information will be supplied by your ISP. Select DHCP Client to obtain IP Address information DHCP automatically from your ISP.

  • Page 81: Lan Setup

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Load Balance Weight allows you to set a relative weight (from 1 - 10) Load Balance Weight for each WAN port. External Connection Enable to detect the status of WAN connection.

  • Page 82: Multi-Subnet

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.5.4 Multi-Subnet 4.5.5 Routing Please refer to the following sections for the details as shown in Figures 4-31 and Figure 4-31: Routing table - 82 -...
  • Page 83 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-32: Routing setup Routing tables contain a list of IP addresses. Each IP address identifies a remote router (or other network gateway) that the local router is configured to recognize. For each IP address, the routing table additionally stores a network mask and other data that specifies the destination IP address ranges that remote device will accept.

  • Page 84: Wan Ipv6 Setting

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.5.6 WAN IPv6 Setting This page is used to configure parameter for IPv6 internet network which connects to WAN port of the router as shown in Figure 4-33. It allows you to enable IPv6 function and set up the parameters of the router’s WAN.
  • Page 85 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-34: DHCP Object Description By default, the DHCP Server is enabled, meaning the router will DHCP Service assign IP addresses to the DHCP clients automatically. If user needs to disable the function, please set it as disable.

  • Page 86: Ddns

    PLANET Easy DDNS PLANET Easy DDNS is an easy way to help user to get your Domain Name with just one click. You can just log in to the Web Management Interface of your devices, say, your router, and check the DDNS menu and just enable it.
  • Page 87 Note that please first register with the DDNS service and set up the domain name of your choice to begin using it. When the PLANET DDNS service is activated, user is able to select to enable or disable Easy DDNS.

  • Page 88: Mac Address Clone

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.5.9 MAC Address Clone Clone or change the MAC address of the WAN interface. The setup is shown in Figure 4-36. Figure 4-36: MAC Address Clone Object Description Set the function as enable or disable.

  • Page 89: Security

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.6 Security The Security menu provides Firewall, Access Filtering and other functions as shown in Figure 4-37. Please refer to the following sections for the details. Figure 4-37: Security menu Object Description Firewall Allows setting DoS (Denial of Service) protection as enable.

  • Page 90: Firewall

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.6.1 Firewall A "Denial-of-Service" (DoS) attack is characterized by an explicit attempt by hackers to prevent legitimate users of a service from using that service. The router can prevent specific DoS attacks as...
  • Page 91 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series If the function is enabled, when the number of the current UPD-FLOOD packets is beyond the set value, the router will start Block UDP Flood the blocking function immediately. The default configuration is disabled.

  • Page 92: Mac Filtering

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.6.2 MAC Filtering Entries in this table are used to restrict certain types of data packets from your local network or Internet through the router. Use of such filters can be helpful in securing or restricting your local network as...

  • Page 93: Ip Filtering

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.6.3 IP Filtering IP Filtering is used to deny LAN users from accessing the public IP address on internet as shown in Figure 4-40. To begin blocking access to an IP address, enable IP Filtering and enter the IP address of the web site you wish to block.

  • Page 94: Web Filtering

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Destination IP Address Input the IP address of web site which you want to block. Anywhere (of destination Check the box if you want to control all web sites, meaning the LAN IP Address) user can’t visit any web site.

  • Page 95: Port Forwarding

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Status Set the rule as enable or disable. Input the URL address that you want to filter, such as Filter Keyword www.yahoo.com. 4.6.5 Port Forwarding Entries in this table allow you to automatically redirect common network services to a specific machine behind the NAT firewall as shown in Figure 4-44.

  • Page 96: Dmz

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Rule Name Enter any words for recognition. Select the protocol type (TCP, UDP or both). If you are unsure, Protocol please leave it to the default both protocols. Enter the external ports you want to control. For TCP and UDP...

  • Page 97: Virtual Private Network

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Enter the IP address of a particular host in your LAN which will DMZ IP Address receive all the packets originally going to the WAN port/Public IP address above. 4.7 Virtual Private Network To obtain a private and secure network link, the router is capable of establishing VPN connections.

  • Page 98: Ipsec

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series L2TP Allows setting L2TP function. SSL VPN Allows setting SSL VPN function. Certificates Download System CA Certificate VPN Connection Allows checking VPN Connection Status. 4.7.1 IPSec IPSec (IP Security) is a generic standardized VPN solution. IPSec must be implemented in the IP stack which is part of the kernel.
  • Page 99 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-49: IPSec Tunnel Object Description IPSec Tunnel Enable Check the box to enable the function. Tunnel Name Enter any words for recognition. This is only available for host-to-host connections and specifies to which interface the host is connecting.
  • Page 100 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Remote IP Address Input the IP address of the remote host. For instance, "210.66.1.10”. Remote Network The remote subnet in CIDR notation. For instance, "210.66.1.0”. The netmask of the remote host. Remote Netmask Set up the detection time of DPD (Dead Peer Detection).

  • Page 101: Gre

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series by using it three times. It can achieve an algorithm up to 168 bits. SHA1: The SHA1 is a revision of SHA. It has improved the shortcomings of SHA. By producing summary hash values, it can achieve an algorithm up to 160 bits.
  • Page 102 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Figure 4-51: GRE Tunnel Object Description Check the box to enable the function. Active Enter any words for recognition. Tunnel Name This is only available for host-to-host connections and specifies to which interface the host is connecting.

  • Page 103: Pptp Server

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.7.3 PPTP Server Use the IP address and the scope option needs to match the far end of the PPTP server; its goal is to use the PPTP channel technology, and establish Site-to-Site VPN where the channel can have equally good results from different methods with IPSec.
  • Page 104 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Set the authentication as enable or disable. MSCHAP v2 When the PPTP client connects to the PPTP server, it will assign the DNS server IP address to client. When the PPTP client connects to the PPTP server, it will assign the WINS WINS server IP address to client.

  • Page 105: L2Tp Server

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.7.4 L2TP Server This section assists you in setting the L2TP Server as shown in Figure 4-53. Figure 4-53: L2TP Server Object Description L2TP Server Set the function as enable or disable.
  • Page 106 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description With IPsec Set the function as enable to make the L2TP work with IPsec encryption. Preshare Key Enter a pass phrase. User and Password Create the username and password for the VPN client.

  • Page 107: Ssl Vpn

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.7.5 SSL VPN This section assists you in setting the SSL Server as shown in Figure 4-54. Figure 4-54: SSL Server Object Description Set the function as enable or disable. SSL VPN Server Set a port for the SSL Service.

  • Page 108: Vpn Connection

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.7.6 VPN Connection This page shows the VPN connection status as shown in Figure 4-55. Figure 4-55: VPN Connection Status Object Description Click the IPSec/GRE/…/SSL VPN bookmark to check the current VPN Connection connection status.

  • Page 109: Ap Control

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.8 AP Control The AP Control menu provides the following features for managing the system as Figure 4-56 is shown below: Figure 4-56: AP Control Menu Object Description Preference Edit region, RO community, RW community...

  • Page 110: Preference

    On this page, you can add new APs in your AP Control System. Step as follows : Step 1. Press the Search button to discover PLANET devices. Step 2. Waiting for few time, Choose which AP you want to add.

  • Page 111: Ap Management

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.8.3 AP Management On this page, you can management your APs, Including check AP online status, config AP (IP address, Mask, SSID and Radio profile), reboot AP, firmware update, delete AP in the AP Control system.

  • Page 112: Ap Group Management

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Notes: 1. To configure multiple APs at one time, select multiple APs and then choose one of the action icons on the top of the page. The "Link" action is not allowed for multiple APs.

  • Page 113: Ssid Profile

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Note: To do profile provisioning to multiple AP groups at one time, select multiple AP groups, and then click the “Apply” button. The "Link" action is not allowed for multiple APs or AP group.

  • Page 114: Radio 2.4G Profile

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.8.6 Radio 2.4G Profile On the Radio profile configuration page, enter the value that you preferred and then click “Apply” to save the profile. Action: Object Description Add new profile: Click it to add a new profile.

  • Page 115: Radio 5G Profile

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.8.7 Radio 5G Profile On the Radio profile configuration page, enter the value that you preferred and then click “Apply” to save the profile. Action: Object Description Add new profile: Click it to add a new profile.

  • Page 116: Statistics Ap Status

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.8.8 Statistics AP Status On this page, you can observe the current configuration of all managed APs. Filter: You can filter the AP list by entering the keyword in the field next to the magnifier icon. The keyword should be in any context that belongs to the fields of this page.

  • Page 117: Map It

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.8.10 Map It On this page you can add managed APs to the actual position against the floor map. This is convenient to user to view and adjust the actual deployment by reference to its real transmission power and channel allocation.

  • Page 118: Upload Map

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.8.11 Upload Map On this page, the system allows you to upload your floor map to the system. Note: The system allows user to upload up to 10 floor maps. - 118 -...

  • Page 119: Power Over Ethernet

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.9 Power over Ethernet The PoE menu provides the following features for managing the system. Object Description PoE Configuration Allows to centralize management PoE power for PDs. PoE Status Displays the current PoE usage.
  • Page 120 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description • System PoE Admin Allows user to enable or disable PoE function. It will cause all of PoE Mode ports to supply or not to supply power. • PoE Function There are three modes for PoE mode.

  • Page 121: Poe Status

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.9.2 PoE Status This section provide per port PoE status. 4.9.3 PoE Schedule This page allows the user to define PoE schedule and scheduled power recycling. Please press Add New Rule button to start setting PoE Schedule function. You have to set PoE schedule to profile and then go back to PoE Port Configuration, and select “Schedule”...
  • Page 122 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description • Profile Set the schedule profile mode. Possible profiles are: Profile1 Profile2 Profile3 Profile4 • Week Day Allows user to set week day for defining PoE function by enabling it on the day.

  • Page 123: Pd Alive Check

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series indicated time. • Reboot Hour Allows user to set what hour PoE reboots. This function is only for PoE reboot schedule. • Reboot Min Allows user to set what minute PoE reboots. This function is only for PoE reboot schedule.
  • Page 124 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series response. The PoE Switch Series offers the following 3 actions:  PD Reboot: It means system will reset the PoE port that is connected to the PD.  PD Reboot & Alarm: It means system will reset the PoE port and issue an alarm message via Syslog.

  • Page 125: Wireless

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.10 Wireless The Wireless menu provides the following features for managing the system Object Description 2.4G WiFi Allow to configure 2.4G WiFi. 5G WiFi Allow to configure 5G WiFi. MAC ACL Allow configure MAC ACL.

  • Page 126: Wifi

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Wireless Status Allows user to enable or disable 2.4G WiFi Wireless Name (SSID) It is the wireless network name. The default 2.4G SSID is “PLANET_2.4G” Hide SSID Allows user to enable or disable SSID Bandwidth Select the operating channel width, “20MHz”...

  • Page 127: Mac Acl

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.10.3 MAC ACL This page allows the user to define MAC ACL. Object Description Active Allows the devices to pass in the rule Device Name Set an allowed device name MAC Address Set an allowed device MAC address Press the “Add”...

  • Page 128: Wifi Advanced

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.10.4 WiFi Advanced This page allows the user to define advanced setting of WiFi. Object Description 2.4G Mode 11AC: Select 802.11B/G or 802.11N/G 11AX: Select 802.11B/G or 802.11N/G or 802.11AX 5G Mode 11AC: Select 802.11A or 802.11AN or 802.11AC...

  • Page 129: Wifi Statistics

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.10.5 WiFi Statistics This page shows the statistics of WiFi traffic. 4.10.6 Connection Status This page shows the host names and MAC address of all the clients in your network Object Description Name Display the host name of connected clients.

  • Page 130: Maintenance

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series 4.11 Maintenance The Maintenance menu provides the following features for managing the system Object Description Allows changing the login username and password. Administrator Allows setting Date & Time function. Date & Time Export the router’s configuration to local or USB sticker.

  • Page 131: Date And Time

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Username Input a new username. Password Input a new password. Confirm Password Input password again. 4.11.2 Date and Time This section assists you in setting the system time of the router. You are able to either select to set the...

  • Page 132: Saving/Restoring Configuration

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series set its time based on your selection. Once this function is enabled, router will automatically update current NTP Client Update time from NTP server. NTP Server User may use the default NTP sever or input NTP server manually.

  • Page 133: Upgrading Firmware

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description USB Storage The status of USB storage. Backup Settings to Press the button to save setting file to USB storage. USB Storage Load Settings from Press the button to upload setting file from USB storage.

  • Page 134: Diagnostics

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Reboot Press the button to reboot system. Reset Press the button to restore all settings to factory default settings. I'd like to keep the network Check the box and then press the button profiles.
  • Page 135 Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Object Description Select an interface of the router. Interface Target Host The destination IP Address or domain. Number of Packets Set the number of packets that will be transmitted; the maximum is 100.

  • Page 136: Appendix A: Ddns Application

    Enterprise 5-Port 10/100/1000T VPN Security Router VR-300 series Appendix A: DDNS Application Configuring PLANET DDNS steps: Step 1: Visit DDNS provider’s web site and register an account if you do not have one yet. For example, register an account at http://planetddns.com...

Table of Contents