Chapter 4 Configure The Device; Login; Status - TP-Link TL-WA701ND User Manual

Chapter 4 Configure the Device

This Chapter describes how to configure your Access Point via the web-based management page.
The TL-WA701ND 150Mbps Wireless Lite N Access Point is easy to configure and manage with
the Web-based (Internet Explorer, Netscape
management page, which can be launched on any windows, Macintosh or UNIX OS with a web
browser.

4.1 Login

Open your web browser. Type in IP address http://192.168.1.254 in the address field of web
browser and press Enter.
Enter admin for the User Name and Password (both in lower case letters) in Figure 4-2 below.
Then click OK or press Enter.
Note:
If the above screen does not prompt, it means that your web-browser has been set to a proxy. Go
to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears,
cancel the Using Proxy checkbox, and click OK to finish it.
After a successful login, you can configure and manage the device. There are six main menus on
the leftmost column of the web-based management page: Status, QSS, Network, Wireless,
DHCP and System Tools. Submenus will be available after clicking one of the main menus. On
the right of the web-based management page lies the detailed explanations and instructions for
the corresponding page.

4.2 Status

Selecting Status will enable you to view the AP's current status and configuration, all of which is
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide
®
Figure 4-1 Login to the AP
Figure 4-2 Login Windows
Navigator, Firefox, Safari, Opera or Chrome)
13