TP-Link TL-WA701ND User Manual page 37

5) Universal Repeater: This mode allows the AP with its own BSS to relay data to a root AP to
which it is associated with WDS disabled. The wireless repeater relays signal between its
stations and the root AP for greater wireless range.
MAC of AP - Enter the MAC address of the root AP of which you want to expand wireless
range.
Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the device can be used. It may be illegal to use the wireless function of
the device in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
When you select your local region from the pull-down list, click the Save button, then the
Note Dialog appears. Click OK.
Note:
Limited by local law regulations, version for North America does not have region selection
option.
Channel Width - Determines the channel width to be used. It is unnecessary to change the
default value unless required.
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide
Figure 4-12 Wireless Settings in Repeater mode
Note Dialog
30