TP-Link TL-WA701ND User Manual page 35

Note:
Limited by local law regulations, version for North America does not have region selection
option.
Channel Width - Determines the channel width to be used. It is unnecessary to change the
default value unless required.
Enable Wireless Radio - Select or deselect this check box to allow or deny wireless stations
to access the device.
Click the Search button to detect the SSIDs in the local area.
Note:
To apply any settings you have altered on the page, please click the Save button, and then you
will be reminded to reboot the device.
4) Repeater: This mode allows the AP with its own BSS to relay data to a root AP to which it is
associated with WDS enabled. The wireless repeater relays signal between its stations and
the root AP for greater wireless range.
MAC of AP - Enter the MAC address of the root AP of which you want to expand wireless
range.
Region - Select your region from the pull-down list. This field specifies the region where the
wireless function of the device can be used. It may be illegal to use the wireless function of
the device in a region other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for assistance.
TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide
Figure 4-11 Wireless Settings in Repeater mode
28