Snmp - TP-Link TL-WA701ND User Manual

TL-WA701ND 150Mbps Wireless Lite N Access Point User Guide
There are nine submenus under the System Tools menu (shown as Figure 4-29): SNMP,
Diagnostic, Firmware Upgrade, Factory Defaults, Backup & Restore, Ping Watch Dog,
Reboot, Password, and System Log. Clicking any of them will enable you to configure the
corresponding function. The detailed explanations for each submenu are provided below.
Figure 4-29 The System Tools menu

4.7.1 SNMP

Selecting System Tools > SNMP to enable this function will allow the network management
station to retrieve statistics and status from the SNMP agent in this device. Simple Network
Management Protocol (SNMP) is a popular network monitoring and management protocol, used to
refer to a collection of specifications for network management that include the protocol itself. To
use this function, select Enable and enter the following parameters in Figure 4-30.
Figure 4-30 SNMP Settings
53