Using The Built-In A.tv And D.tv Tuners - Pioneer S-LX70C Operating Instructions Manual

Recording

Using the built-in A.TV and D.TV tuners

Switching between A.TV and D.TV tuners
A.TV/
• (LCD page 2) Press to switch between D.TV
D.TV
(digital) and A.TV (analog).
Changing channels
There are a number of ways to select analog and digital
1
TV channels. Note that you can't change the TV channel
during playback, recording or during recording standby.
+
CH
-
• CH +/– buttons (LCD page 2)
1 2 3
4 5 6
7 8 9
• Number buttons (LCD page 2)
0
For example, to select channel 4 (digital channel
D004), press 4 then ENTER; for channel 34 (digital
channel D034), press 3, 4, ENTER.
• For D.TV channels only, you can also use the Channel
List — see below.
Tip
• When changing terrestrial digital broadcast
channels, channels with a low signal strength may
result in a black screen being displayed.
• For other channels, it may take a short while for the
channel picture to appear, and/or for the channel
number to appear.
• In both of the above cases, some improvement may
be possible by adjusting the antenna.
Note
1 • If you select a locked channel, you will need to enter your password to access it.
• While listening to D.TV radio channels, the screen saver automatically starts after no button has been pressed for three minutes.
2 Analog channel presets are numbered 1 to 99; digital channel presets are numbered D001 to D999.
3 • If you select a locked channel, you will need to enter your password to access it.
• While listening to D.TV radio channels, the screen saver automatically starts after no button has been pressed for three minutes.
4 Due to inaccurate information provided by the broadcaster, some icons may occasionally be present or absent in error.
5 Not all channels supply more detailed information.
Using the D.TV Channel List
When in D.TV mode, you can call up the on-screen Channel List
anytime by pressing ENTER . Use the
channel, then press ENTER to switch to that channel.
Displaying a channel banner
A channel banner shows programme titles, start and end
times of the current programme and other channel
information. The information is updated every minute.
•
current channel.
• Use the
2
for other channels. To switch to the displayed
banner's channel, press ENTER.
• The channel banner displays the Subtitles (
Teletext/MHEG (
channel.
• To see more detailed channel information, press
INFO again.
Use the
previous and following programmes. Use the
buttons to see information about other channels.
• If there is still more information to be displayed,
More ... is displayed; press the BLUE button to see
the extra information.
• To hide the channel banner, press RETURN.
D001
************
D002
************
D003
******
D004
************
D005
****
D006
******
Press to display the channel banner for the
INFO
D001 ************
Now
********************
Next
*************
buttons to display the channel banner
) icon if they apply to the selected
4
5
Now
************************
buttons to display information about
06
buttons to select a
3
Wed.30.Apr 12:46
11:30 - 12:00
12:00 - 12:30
) and
11:30 - 12:00
More...
93
En