Setting The Hdmi Options; Setting The Hdmi Control Mode - Pioneer S-LX70C Operating Instructions Manual

HDMI Control
• Connect the plasma television directly to this unit.
Interrupting a direct connection with other amps or
an AV converter (such as an HDMI switch) can cause
operational errors.
HDMI input
HDMI cable
HDMI output
HDMI input
HDMI cable
HDMI OUT
• Only connect components you intend to use as a
source to the HDMI input of this unit. Interrupting a
direct connection with other amps or an AV converter
(such as an HDMI switch) can cause operational errors.
HDMI input
HDMI cable
HDMI OUT
HDMI Control-compatible
Pioneer plasma television
Other amps
or AV converter
Receiver subwoofer
HDMI Control-compatible
Pioneer plasma television
Receiver subwoofer
HDMI IN
HDMI cable
HDMI output
Other amps or AV converter
Important
• When connecting this system or changing
connections, be sure to switch the power off and
disconnect the power cord from the wall socket.
After completing all connections, connect the power
cords to the wall socket.
• After connecting this unit to an AC outlet, a 15-second
initialization process begins. You cannot carry out
any operations during initialization. The HDMI
indicator on the display unit blinks during
initialization, and you can turn this unit on once it has
stopped blinking.
• To get the most out of this function, we recommend
that you connect your HDMI component not to a
plasma television but rather directly to the HDMI
terminal on this unit.

Setting the HDMI options

You must adjust the settings of this unit as well as HDMI
Control-compatible connected components in order to
make use of the HDMI Control function. For more
information see the operating instructions for each
component.

Setting the HDMI Control mode

Choose whether to set this unit's HDMI Control function
On or Off. You will need to set it to Control On to use the
HDMI Control function.
• When using a TV not manufactured by Pioneer, put
this setting to Control Off.
1 Press SETUP.
SETUP
ENTER
2 Select 'HDMI Setup' then press ENTER.
ENTER
3 Select 'HDMI Ctrl', then press ENTER.
ENTER
4 Adjust the setting then press ENTER to
confirm.
• Control On – Enables the HDMI Control function.
When this unit's power is turned off and you have a
supported source begin playback while using the
HDMI Control function, the audio and video output
from the HDMI connection are output from the
plasma television.
• Control Off – The HDMI Control is disabled.
Synchronized operations cannot be used. When this
unit's power is turned off, audio and video of sources
connected via HDMI are not output.
10
45
En