Table of Contents
Advertisement
• A VR mode DVD-R/-RW (excluding DVD-R DL) disc
can still be recorded and edited on this recorder even
after finalizing.
• DVD-R DL (Video mode) discs and DVD+R DL discs
k 87 ページ ２００７年４月２４日 火曜日 午後７時５８分
must be finalized in order to play in other recorders/
players. Note however that some recorders/players
will not play even finalized dual-layer discs.
1
Load the disc you want to finalize.
Make sure that the recorder is stopped before proceeding.
HOME MENU
2
Select 'Disc Setup' from the Home Menu.
ENTER
3
Select 'Finalize' > 'Finalize' > 'Next Screen'.
er recording
Disc Setup
ring a timer recording.
Basic
日 火曜日 午後７時５８分
Initialize
Finalize
Finalize
Optimize HDD
'Yes' to confirm.
of the recorder before a
g (child lock)
e front panel and remote control
ENTER
using the child lock feature. This is
4
For DVD-R/-RW (Video mode) and
t a timer recording and want to make
DVD+R/+RW discs only, select a title menu style,
settings are not changed before
Live TV
then select 'Yes' to start finalization or 'No' to
STOP REC
hed.
T cable
cancel.
3
Press to stop the recording.
an use
The menu you select will be the one that appears when
The operation is slightly different depending on the
V.
the 'top menu' (or 'menu' for a DVD+R/+RW) is selected
order is on, switch it into standby.
viewing source. See the Operation table below for details.
on any DVD player.
nel] Press and hold for three
Live
Tip
Finalize
e controls.
• When the Pause Live TV setting (see page 145) is set to
play briefly shows LOCKED . If any
TV's Tuner , you can press PAUSE LIVE TV while the
d on the remote or front panel,
rder.
recorder is in standby to switch on and immediately
isplayed again.
start recording. When set to Recorder's Tuner , it is not
ecorder, press and hold
possible to use the Pause Live TV feature from standby.
(while the recorder is stopped) for
• After pressing PAUSE LIVE TV , it will take at least 10
until the display shows UNLOCKED .
seconds for the picture to change (during this time,
nnel.
all controls except the power button are inoperative).
cated in the front panel display, and
(Note that startup from standby is not possible if you
• Discs recorded partially or fully on the Pioneer DVR-
together with the recording time for a
ing FAQ
have selected Recorder's Tuner in Pause Live TV on
7000 DVD recorder do not support this feature. These
cording
disc. If a recordable disc is loaded, the
page 145.)
discs will have only a text title menu when finalized on
aining recording time for that disc is
y Asked Questions
this recorder.
• Please note that you can't record from another
e that if the On Screen Display setting
component (VCR, etc.) that is connected by a SCART
splay on page 144) is Off then this
e timer is set, the recorder doesn't start
cable to the AV2 (INPUT 1/DECODER) connector
t displayed.)
use
using the Pause Live TV feature.
disc loaded or HDD is recordable, not
ting the
k Disc on page 132), and that there are
99 titles already on the DVD/HDD.
ding from the TV
Note
n't let me enter a timer programme!
1 If a disc was previously finalized on an older DVD recorder, you may not be able to re-initialize and/or initialize it for Video mode recording.
o) DVD+R DVD+RW DVD-RAM HDD
a timer programme if the clock isn't
Pause Live TV
rom the TV involves just setting the
Condition
function button
d, choosing whether to record to the
Downloaded From TheatreSystem-Manual.com Manuals
when two or more timer programmes
Pause Live TV
Preset channel of DVR and TV are matched after
nd selecting the recording quality.
downloading from TV.
Channel
the lesser important programme. If one of the
overlapping programmes is a regular timer
programme for a digital broadcast, you may choose
'Cancel Once' in order to avoid having it overlap with
Finalize
Next Screen
a separately scheduled programme (see Skipping a
Start
Undo Finalize
regular timer programme on page 77) .
Simultaneous recording and
playback (Chase Play)
HDD
Chase Play allows you to watch a recording that is still in
progress from the start, without having to wait until the
recording has finished (i.e., playback is 'chasing' the
recording).
In fact, you're not just limited to watching the recording
in progress. You can watch anything else already on the
HDD (or on a DVD if you're recording to the HDD) by
selecting it from the Disc Navigator screen (see Using
the Disc Navigator with recordable discs and the HDD on
page 94).
Chase Play is not possible when DV is the recording input.
PLAY
(Stop) on
•
from the beginning of the current recording
DISC
NAVIGATOR
•
Press during recording to select another
title to play.
You can use all the usual playback controls, such as
pause, slow-motion play, scan and skip.
• To stop playback, press
continue).
• To stop recording, press
continue).
• During recording or in timer recording standby, you
can't play an HDD title, DVD or Video CD/Super VCD
disc if the Input Line System setting doesn't match
the TV line system of the disc/HDD title (see also
Additional information about the TV system settings
on page 146). Also, during simultaneous recording
and playback, if the TV line system of the playback
track/title changes then playback will automatically
5
The recorder will now start finalizing the disc.
During finalization:
• If the finalization process of a DVD-RW or DVD+R/
+RW disc is going to take more than around four
minutes, you can press ENTER to cancel. Around
four minutes before completion, the option to cancel
disappears.
• You can't cancel the finalization of a VR mode DVD-R
disc.
• How long finalization takes depends on the type of
disc, how much is recorded on the disc and the
number of titles on the disc. A disc recorded in VR
mode can take up to one hour to finalize. DVD-R/-RW
(Video mode) and DVD+R/+RW discs can take up to
20 minutes.
Initializing recordable DVD discs
DVD-RDVD-RW DVD+RW DVD-RAM
DVD-R/-RW discs can be initialized for either Video mode
recording or VR mode recording.
When you first load a blank DVD-RW or DVD+RW disc,
the recorder initializes it for recording automatically. By
default, blank DVD-RW discs are initialized for VR mode
recording. See DVD-RW Auto Initialize on page 90 if you
want to change the default to Video mode.
DVD-R discs are ready for Video mode recordings out of
the box; if you want to use a DVD-R for VR mode
recording, you must initialize it before recording anything
on the disc.
DVD+RW and DVD-RAM discs can also be initialized in
order to erase the contents of the disc.
Important
• Initializing a DVD-RW, DVD+RW or DVD-RAM disc
will erase everything recorded on it. Make sure there
is nothing on the disc that you want to keep!
• You may not be able to re-initialize a DVD-RW disc in
Press during recording to start playback
a different format if it was originally initialized on an
older DVD recorder.
• Once initialized for VR mode recording, you can't re-
initialize a DVD-R back to Video mode.
STOP (recording will
STOP REC (playback will
F
1
1
.
En
Hide quick links:
Advertisement
Chapters
Table of Contents
